XRT91L30：STS-12/STM-4 OR STS-3/STM-1 SONET/SDH Transceiver _ BDTIC 中国领先电子元器件代理商

XRT91L30：STS-12/STM-4 OR STS-3/STM-1 SONET/SDH Transceiver

The XRT91L30 is a fully integrated SONET/SDH transceiver for SONET/SDH 622.08 Mbps STS-12/STM-4 or 155.52 Mbps STS-3/STM-1 applications. The transceiver includes an on-chip Clock Multiplier Unit (CMU), which uses a high frequency Phase-Locked Loop (PLL) to generate the high-speed transmit serial clock from a slower external clock reference. It also provides Clock and Data Recovery (CDR) function by synchronizing its on-chip Voltage Controlled Oscillator (VCO) to the incoming serial data stream. The internal CDR unit can be disabled and bypassed in lieu of an externally recovered received clock from the optical module. Either the internally recovered clock or the externally recovered clock can be used for loop timing applications. The chip provides serial-to-parallel and parallel-to-serial converters using an 8-bit wide LVTTL system interface in both receive and transmit directions.

The transmit section includes an 8x9 Elastic Buffer (FIFO) to absorb any phase differences between the transmitter clock input and the internally generated transmitter reference clock. In the event of an overflow, the FIFO can automatically recover from an overflow condition. The device can monitor Loss of Signal (LOS) condition and automatically mute received data upon LOS. An on-chip SONET/SDH frame byte and boundary detector and frame pulse generator offers the ability recover SONET/SDH framing and to byte align the receive serial data stream into the 8-bit parallel bus.

技术特性

Not Recommended for New Designs. Refer to XRT91L31 for new designs.
Targeted for SONET STS-12/STS-3 and SDH STM-4/STM-1 Applications
Selectable full duplex operation between STS-12/STM-4 standard rate of 622.08 Mbps or STS-3/STM-1 155.52 Mbps
Single-chip fully integrated solution containing parallel-to-serial converter, clock multiplier unit (CMU), serial-to-parallel converter, clock data recovery (CDR) functions, and a SONET/SDH frame and byte boundary detection circuit
Ability to disable and bypass onchip CDR for external based received reference clock recovery thru Differential LVPECL input pins XRXCLKIP/N
8-bit LVTTL parallel data bus paths running at 77.76 Mbps in STS-12/STM-4 or 19.44 Mbps in STS-3/STM-1 mode of operation
Uses Differential LVPECL or Single-Ended LVTTL CMU reference clock frequencies of either 19.44 MHz or 77.76 MHz for both STS-12/STM-1 or STS-3/STM-1 operations
Optional use of 77.76 MHz Single-Ended LVTTL input for independent CDR reference clock operation
Able to Detect and Recover SONET/SDH frame boundary and byte align received data on the parallel bus
Diagnostics features include LOS monitoring and automatic received data mute upon LOS
Provides Local, Remote and Split Loop-Back modes as well as Loop Timing mode
Optional access to internal FIFO has the advantage of permitting the upstream device time domain to be decoupled from the transceiver transmit timing and re-configure the transmit parallel bus clock output to a clock input and accept timing signal from the upstream device
Meets Telcordia, ANSI, Bellcore TR-NWT-000253 and GR-253-CORE, and ITU-T jitter requirements
Operates at 3.3V with 3.3V I/O
Less than 660mW Typical Power Dissipation
Package: 10 x 10 x 2.0 mm 64-pin QFP
Pb-Free, RoHS Compliant Versions Offered

产品应用

SONET/SDH-based Transmission Systems
Add/Drop Multiplexers
Cross Connect Equipment
ATM and Multi-Service Switches, Routers and Switch/Routers
DSLAMS
SONET/SDH Test Equipment
DWDM Termination Equipment

规格	参数
Line Interface	OC-12/OC-3
Protocols	SONET/SDH
Trans Interface	8-Bit TTL
Pwr Sup	3.3V
封装	PQFP-64

订购型号

器件型号	封装编码	最低温度	最高温度	状态
XRT91L30IQ	QFP64	-40	85	NRND
XRT91L30IQ-F	QFP64	-40	85	NRND

十二月 2013 XR68M752