ICB2FL03G

The new ICB2FL03G in a slim SO-16 package is the latest extension of Infineon's smart ballast controller family. It is tailored for cost-performance optimized applications operating serial connected FL/CFL lamps. The performance and feature set of the ICB2FL03G is very similar to the well established ICB2FL01G in a SO-19 package. The product integrates all functions required to operate FL lamps such as preheat-, ignition- and run-mode and protection features. Digital mixed-signal power control is employed enabling speedy, cost-effective and stable ballast designs with a minimum number of external components. Reliable and robust high voltage isolation is achieved using Infineon’s proprietary Coreless Transformer Technology (CLT)

ParametricICB2FL03G
FeaturesFully Integrated
Output Current  min  max300.0mA  500.0mA
PackagePG-DSO-16
TopologyHalf Bridge
VCC  min  max0.3V  18.0V
Sales Product NameICB2FL03G
OPNICB2FL03GXUMA2
Product Statusactive and preferred
Package NamePG-DSO-16
Completely lead freeyes
Halogen freeyes
RoHS compliantyes
Packing Size2500
Packing TypeTAPE & REEL
Moisture Level3
Summary of Features:
  • Integrated critical conduction mode PFC stage with enhanced dynamic PFC performance over wide load range
  • Intelligent digital-/mixed-signal lamp inverter control
  • Integrated high-voltage level-shift half-bridge driver
  • Optimized for dimmable FL/CFL ballasts
  • Drives up to 2 lamps in serial connection with few external components required
  • Built-in protection functions such as Over-Voltage Protection (OVP) and Over-Current Protection (OCP)
  • Adjustable end-of-life detection in multi-lamp topologies and detection of capacitive mode operation
  • Able to handle lamp chokes with high saturation behavior
  • Special in-circuit test mode for faster test time
  • Parameters set with resistors only
  • Separate adjustable levels of lamp overload and rectifier effect detection (EoL1, EoL2)
  • Self-adapting dead time adjustment of the half-bridge driver
  • Highly accurate timing and frequency control over wide temperature range (-25 to 125 °C)
Benefits:
  • Reduced BOM cost by optimized lamp choke size
  • Halving the time for key tests such as end-of-life detection and preheat/operation modes
  • Reduced system cost and improved ballast stability
  • „„Suitable for dimming & multi-power ballasts
  • Enables ballast compatibility with a wider range of lamp types
  • Lamp can automatically restart following surge events and handle correctly EOL events
  • Eases design of multi-power ballasts and reduces EMI
  • Reliable, stable ballast designs
Target Applications:
  • FL/CFL Ballasts
功能框图
Data Sheet
TitleSizeDateVersion
ICB2FL03G Data Sheet V1.1,EN3.3 MB14 八月 201301_01
Application Notes
TitleSizeDateVersion
Application Notes ICB2FL03GEN2.9 MB10 四月 201201_01
Demo Board Description ICB2FL03GEN2.7 MB15 九月 201001_10
Application Brochure
TitleSizeDateVersion
General Lighting Application BrochureJA1.7 MB23 九月 201401_00
General Lighting Application BrochureEN3.3 MB01 三月 201601_00
General Lighting Application BrochureCN6.9 MB23 十月 201401_00
Product Selection Guide
TitleSizeDateVersion
NEW! Power Management Selection Guide 2016EN4.7 MB22 二月 201600_00
PCB Design Data
TitleSizeDateVersion
PCB Footprints & Symbols Ballast Control IC for fluorescent lamps Altium v1.078 KB23 十月 201302_00
PCB Footprints & Symbols Ballast Control IC for fluorescent lamps Cadence v2.064 KB23 十月 201302_00
PCB Footprints & Symbols Ballast Control IC for fluorescent lamps Eagle v2.014 KB23 十月 201302_00
PCB Footprints & Symbols Ballast Control IC for fluorescent lamps Mentor v2.076 KB23 十月 201302_00
Evaluation Boards
BoardFamilyDescriptionStatus
EVAL ICB2FL03GLED Driver & Ballast ControllerEvaluation board for 54W T5 single fluorescent lamp design with voltage mode preheating using ICB2FL03GICB 2FL03Gactive and preferred
PCB Design Data
TitleSizeDateVersion
PCB Footprints & Symbols Ballast Control IC for fluorescent lamps Altium v1.078 KB23 十月 201302_00
PCB Footprints & Symbols Ballast Control IC for fluorescent lamps Cadence v2.064 KB23 十月 201302_00
PCB Footprints & Symbols Ballast Control IC for fluorescent lamps Eagle v2.014 KB23 十月 201302_00
PCB Footprints & Symbols Ballast Control IC for fluorescent lamps Mentor v2.076 KB23 十月 201302_00
EN ICB2FL03G
EN ICB2FL03G
EN ICB2FL03G
JA ICL8002G
EN 1200v-thinq-tm-sic-diode
CN ICL8002G
EN IDV20E65D1
PCB Footprints & Symbols Ballast Control IC for fluorescent lamps Altium v1.0 ICB2FL02G
PCB Footprints & Symbols Ballast Control IC for fluorescent lamps Cadence v2.0 ICB2FL02G
PCB Footprints & Symbols Ballast Control IC for fluorescent lamps Eagle v2.0 ICB2FL02G
PCB Footprints & Symbols Ballast Control IC for fluorescent lamps Mentor v2.0 ICB2FL02G