SAK-XE167FH-200F100L AB
The XE167xH series (16-Bit Single-Chip Real Time Signal Controller) is a part of the Infineon XE166 Family of full-feature singlechip CMOS microcontrollers. These devices extend the functionality and performance of the C166 Family in terms of instructions (MAC unit), peripherals, and speed. They combine high CPU performance (up to 100 million instructions per second) with extended peripheral functionality and enhanced IO capabilities. Optimized peripherals can be adapted flexibly to meet the application requirements. These derivatives utilize clock generation via PLL and internal or external clock sources. On-chip memory modules include program Flash, program RAM, and data RAM.
| Parametric | SAK-XE167FH-200F100L AB |
|---|
| Budgetary Price €/1k | 8.92 |
|---|
| Clock Frequency
max | 100.0MHz |
|---|
| SRAM (incl. Cache) | 138.0kByte |
|---|
| CAN Nodes | 6 |
|---|
| A/D Input Lines
(incl. FADC) | 24 |
|---|
| Program Memory | 1600.0kByte |
|---|
| Type of Memory | Flash |
|---|
| FlexRayTM | no |
|---|
| Number of ADC Modules | 2.0 |
|---|
| Digital I/O Pins | 118 |
|---|
| EEPROM Emulation
(Data-Flash) | yes |
|---|
| Timed I/O Pins
(PWM, CAPCOM) | 60 |
|---|
| Serial I/O Interfaces | 8 |
|---|
| Type of Serial I/O Interfaces | CAN |
|---|
| Type of Serial I/O Interfaces | I²C |
|---|
| Type of Serial I/O Interfaces | I²S |
|---|
| Type of Serial I/O Interfaces | LIN |
|---|
| Type of Serial I/O Interfaces | SPI |
|---|
| Type of Serial I/O Interfaces | UART |
|---|
| Instruction Width
([bits]) | 16/32 |
|---|
| Instruction Set Architecture | C166S V2 (16-bit) |
|---|
| Peripheral Control Processor | no |
|---|
| DMA Channels | 8 |
|---|
| Timer/Counter | 18 |
|---|
| External Bus Interface | yes |
|---|
| Fast Flash Programming | no |
|---|
| Temperature | -40 to 125°C |
|---|
| Power Mode | 3 |
|---|
| DSP Functionality | yes |
|---|
| On-chip Clock Generation | yes |
|---|
| I/O Operation Voltages | 3.3V |
|---|
| I/O Operation Voltages | 5.0V |
|---|
| Touch/LED Matrix Control | no |
|---|
| On-chip Voltage Regulator | yes |
|---|
| Real Time Clock | yes |
|---|
| Floating Point Unit | no |
|---|
| Watchdog Timer | yes |
|---|
| Oscillator Watchdog | yes |
|---|
| Qualification | Industrial |
|---|
| Additional Features | no comment |
|---|
| Sales Product Name | SAK-XE167FH-200F100L AB |
|---|
| OPN | XE167FH200F100LABKXUMA1 |
|---|
| Product Status | active and preferred |
|---|
| Package Name | PG-LQFP-144 |
|---|
| Completely lead free | yes |
|---|
| Halogen free | yes |
|---|
| RoHS compliant | yes |
|---|
| Packing Size | 500 |
|---|
| Packing Type | TAPE & REEL |
|---|
| Moisture Level | 3 |
|---|
|  |
Data Sheet
Application Notes
User Manual
Training
Material Content SheetInfo
Evaluation Boards
| Board | Family | Description | Status |
|---|
| KIT_DAP_MINIWIGGLER_USB | Microcontroller | The miniWiggler is Infineon’s high performance and cost-efficient debugging tool for the future. On the host side, it has an USB interface, which is available on every computer. On the device side, the communication goes over Infineon 10-pin DAP or 16-pin OCDSL1 interfaces. The miniWiggler has been designed specifically to work in combination with Infineon’s Debug Access Software (DAS).All microcontrollers with DAP interface | active and preferred |
| KIT_XE167F_EK_V1 | Microcontroller | For evaluation of XE164/XE167 including documentation, compiler, debugger, DAVE™ mother system v2.1 and a flash programming tool.XE164FXE167F | active and preferred |
| KIT_XE167FH_EK_V1 | Microcontroller | For evaluation of XE167FH/XE169FH including Getting Started, DAVE™ , technical documentation, compiler and debugger. USB cable for power supply, virtual COM port and flash programming and debugging.XE167FHXE169FH | on request |
Package Data
