TLE42364G infineon _ BDTIC 中国领先电子元器件代理商

TLE42364G

TLE42364G is a low dropout voltage regulator for 5 V supply in a PG-SOT223-4 SMD package. The IC regulates an input voltage V I in the range of 5.5 V < V I < 45 V to V Q,nom = 5 V. The maximum output current is more than 100 mA. The IC can be switched off via the enable input, which causes the current consumption to drop below 10 µA. The IC is protected against short circuit and overheat by the incorporated output current limitation and the over temperature shutdown.

Parametric	TLE42364G
Operating Voltage min max	5.5V 45.0V
Output Voltage Type	5.0V
Accuracy	2.0%
Output Current (max.)	100mA
Regulator Type	Linear
Dropout Voltage	250mV
Quiescent Current	400µA
Operating Temperature min max	-40.0°C 150.0°C
Over Voltage Protection	no
Enable (=Inhibit)	yes
Reset	no
Power Fail	no
Power Good	no
Status Output	no
Hold	no
Watchdog	no
Early Warning	no

Sales Product Name	TLE42364G
OPN	TLE42364GHTMA1
Product Status	active and preferred
Package Name	PG-SOT223-4
Completely lead free	yes
Halogen free	no
RoHS compliant	yes
Packing Size	4000
Packing Type	TAPE & REEL

Summary of Features:

Output Voltage 5 V
Output Voltage Tolerance ≤ ±2%
100 mA Current Capability
Very Low Current Consumption
Low Dropout Voltage
Over Temperature Shutdown
Reverse Polarity Protection
Output Current Limitation
Wide Temperature Range
Suitable for Use in Automotive Electronics
Enable
Green Product (RoHS compliant)
AEC Qualified
Wide Temperature Range -40 °C ≤ T j ≤ 150 °C

Benefits:

Robust Protection Features
Wide Anput Operation and Temperature Range

Target Applications:

Automotive General

功能框图

Data Sheet

Title	Size	Date	Version
TLE42364 Data Sheet,EN	1.2 MB	19 三月 2010	01_00

Product Brochure

Title	Size	Date	Version
What the designer should know: introduction to Automotive Linear Voltage Regulator	3.9 MB	17 七月 2014

Application Notes

Title	Size	Date	Version
TLE4267/TLE4267-2 - INH/HOLD Function；EN	244 KB	27 四月 2015	01_33

Product Selection Guide

Title	Size	Date	Version
Automotive Power Selection Guide；EN	10.6 MB	19 一月 2016	01_01

Material Content SheetInfo

Title	Size	Date	Version
MCDS_2013-08-28_23-08-48_MA000838962_PG-SOT223-4-23.pdf	19 KB	31 十月 2013	01_00

PCB Design Data

Title	Size	Date	Version
PCB Footprints & Symbols - Altium - v1.0	3.6 MB	02 十月 2013	01_00
PCB Footprints & Symbols - Cadence - v1.0	2.6 MB	02 十月 2013	01_00
PCB Footprints & Symbols - Eagle - v1.0	569 KB	02 十月 2013	01_00
PCB Footprints & Symbols - Mentor - v1.0	3.5 MB	02 十月 2013	01_00

Evaluation Boards

Board	Family	Description	Status
TLS810C1EJV33 BOARD	Linear Voltage Regulator	The TLS810C1EJV33 is a linear voltage regulator of wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 8.5μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810C1EJV33 is available in 3.3V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. With extended operating range down to 2.75V, TLS810C1EJV33 is also suitable to supply automotive systems operating during cranking condition. TLS810C1EJV33 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.Channel=ff80808112ab681d0112ab69bfb202efTLS810C1EJV33	on request
TLS810D1EJV50 BOARD	Linear Voltage Regulator	The TLS810D1EJV50 is a linear voltage regulator featuring wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 9μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810D1EJV50 is available in 5.0V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. The device can be switched on and off by the Enable feature leading to a current consumption of less than 1μA. With extended operating range down to 2.75V, TLS810D1EJV50 is also suitable to supply automotive systems operating during cranking condition. TLS810D1EJV50 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.TLS810D1EJV50	on request

Package Data

Title	Size	Date	Version
PG-SOT223-4-23 \| TLE42364GHTMA1；EN	446 KB	11 四月 2016	01_00

PCB Design Data

Title	Size	Date	Version
PCB Footprints & Symbols - Altium - v1.0	3.6 MB	02 十月 2013	01_00
PCB Footprints & Symbols - Cadence - v1.0	2.6 MB	02 十月 2013	01_00
PCB Footprints & Symbols - Eagle - v1.0	569 KB	02 十月 2013	01_00
PCB Footprints & Symbols - Mentor - v1.0	3.5 MB	02 十月 2013	01_00