TLE4254EJ A
The TLE4254 is a monolithic integrated low-dropout voltage tracking regulator with high accuracy in small PG- DSO-8 packages. The IC is designed to supply off-board systems, e.g. sensors in powertrain management systems under the severe conditions of automotive applications. Therefore, the IC is equipped with additional protection functions against reverese polarity and short circuit to GND and battery. With supply voltages up to 40 V, the output voltage follows a reference voltage applied at the adjust input with very high accuracy. The reference voltage applied directly to the adjust input or by an e. g. external resistor divider can be 2.0 V at minimum. The output is able to drive loads up to 70 mA while the device follows with high accuracy the e. g. 5 V output of a main voltage regulator acting as reference.
| Parametric | TLE4254EJ A |
|---|
| Operating Voltage
min
max | 4.0V
45.0V |
|---|
| Output Voltage Type | adj. |
|---|
| Accuracy | 0.1% |
|---|
| Output Current
(max.) | 70mA |
|---|
| Regulator Type | Linear->Tracker |
|---|
| Dropout Voltage | 200mV |
|---|
| Quiescent Current | 50µA |
|---|
| Operating Temperature
min
max | -40.0°C
150.0°C |
|---|
| Over Voltage Protection | no |
|---|
| Enable (=Inhibit) | yes |
|---|
| Reset | no |
|---|
| Power Fail | no |
|---|
| Power Good | no |
|---|
| Status Output | no |
|---|
| Hold | no |
|---|
| Watchdog | no |
|---|
| Early Warning | no |
|---|
| Automotive Qualified | yes |
|---|
| Sales Product Name | TLE4254EJ A |
|---|
| OPN | TLE4254EJAXUMA1 |
|---|
| Product Status | active and preferred |
|---|
| Package Name | PG-DSO-8 |
|---|
| Completely lead free | yes |
|---|
| Halogen free | yes |
|---|
| RoHS compliant | yes |
|---|
| Packing Size | 2500 |
|---|
| Packing Type | TAPE & REEL |
|---|
| Moisture Level | 3 |
|---|
| |
|---|
| OPN | TLE4254EJAXUMA2 |
|---|
| Product Status | active and preferred |
|---|
| Package Name | PG-DSO-8 |
|---|
| Completely lead free | yes |
|---|
| Halogen free | yes |
|---|
| RoHS compliant | yes |
|---|
| Packing Size | 2500 |
|---|
| Packing Type | TAPE & REEL |
|---|
| Moisture Level | 3 |
|---|
| Summary of Features:- 70 mA output current capability
- Very tight output tracking tolerance to reference
- Output voltage adjustable down to 2.0 V
- Stable operation with 1 µF ceramic output capacitor
- Flexibility of output voltage adjust higher or lower than reference,proportional to the reference voltage (version GA / EJ A)
- Status output to indicate short circuits at the output (version GS / EJ S)
- Very low dropout voltage of typ. 0.2 V @ maximum output current
- Combined reference / enable input
- Very low current consumption in OFF mode
- Wide input voltage range -20 V ≤ V I ≤ +45 V
- Wide temperature range: -40 °C ≤ T j ≤ 150 °C
- Output protected against short circuit to GND and battery
- Input protected against reverse polarity
- Overtemperature protection
- Green product (RoHS compliant)
- AEC qualified
Benefits:- Efficient and accurate voltage replication
- Heat distribution in the system
- Robust tracking supply
Target Applications:- Sensor Supply
- Heat distribution
- Secondary µcontroller supply
 功能框图      |
Data Sheet
Product Brochure
Application Notes
Product Selection Guide
Material Content SheetInfo
PCB Design Data
Evaluation Boards
| Board | Family | Description | Status |
|---|
| TLS810C1EJV33 BOARD | Linear Voltage Regulator | The TLS810C1EJV33 is a linear voltage regulator of wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 8.5μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810C1EJV33 is available in 3.3V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. With extended operating range down to 2.75V, TLS810C1EJV33 is also suitable to supply automotive systems operating during cranking condition. TLS810C1EJV33 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.Channel=ff80808112ab681d0112ab69bfb202efTLS810C1EJV33 | on request |
| TLS810D1EJV50 BOARD | Linear Voltage Regulator | The TLS810D1EJV50 is a linear voltage regulator featuring wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 9μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810D1EJV50 is available in 5.0V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. The device can be switched on and off by the Enable feature leading to a current consumption of less than 1μA. With extended operating range down to 2.75V, TLS810D1EJV50 is also suitable to supply automotive systems operating during cranking condition. TLS810D1EJV50 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.TLS810D1EJV50 | on request |
Package Data
PCB Design Data
