TLE4266-2G

The TLE 4266-2 is a monolithic integrated low-drop fixed voltage regulator which can supply loads up to 150 mA. It can be switched on and off by the INH pin. It is functional compatible to the TLE 4266, but with a reduced quiescent current of << 1 µ A in OFF mode and 40 µ A in ON mode. The TLE 4266-2 is especially designed for all applications that require very low quiescent current in ON and OFF mode. The device is available in the small surface mounted PG-SOT223-4 package. It is pin compatible to the TLE 4266 G. It is designed to supply microprocessor systems under the severe condition of automotive applications and therefore it is equipped with additional protection against over load, short circuit and overtemperature. Of course the TLE 4266-2 can be used in other applications, where a stabilized voltage and the inhibit feature is required. And input voltage VI up to 45 V is regulated to VQ = 5 V (TLE 4266-2 G) or VQ = 3.3 V (TLE 4266-2 GSV33) with an accuracy of ±3%. For the 5 V device an accuracy of ±2% is kept for a load current range  up to 50 mA. The device operates in the temperature range of T j = -40 to 150 °C. A high level at the INH pin switches the regulator on.

ParametricTLE4266-2G
Operating Voltage  min  max5.5V  45.0V
Output Voltage Type5V
Accuracy3.0%
Output Current (max.)100mA
Regulator TypeLinear
Dropout Voltage250mV
Quiescent Current300µA
Operating Temperature  min  max-40.0°C  150.0°C
Over Voltage Protectionno
Enable (=Inhibit)yes
Resetno
Power Failno
Power Goodno
Status Outputno
Holdno
Watchdogno
Early Warningno
Sales Product NameTLE4266-2G
OPNTLE42662GHTMA2
Product Statusactive and preferred
Package NamePG-SOT223-4
Completely lead freeyes
Halogen freeno
RoHS compliantyes
Packing Size4000
Packing TypeTAPE & REEL
Summary of Features:
  • Fixed output voltage 5.0 V or 3.3 V
  • Output voltage tolerance  ≤   ± 2%,  ± 3%
  • 150 mA current capability
  • Very low current consumption
  • Low-drop voltage
  • Overtemperature protection
  • Reverse polarity proof
  • Wide temperature range
  • Suitable for use in automotive electronics
  • Inhibit
  • Green Product (RoHS compliant)
  • AEC Qualified
Benefits:
  • Robust protection features
  • Wide input operation and temperature range
Target Applications:
  • Automotive general
功能框图
Data Sheet
TitleSizeDateVersion
TLE4266-2_DS,EN207 KB25 五月 200901_04
Product Brochure
TitleSizeDateVersion
What the designer should know: introduction to Automotive Linear Voltage Regulator3.9 MB17 七月 2014
Application Notes
TitleSizeDateVersion
TLE4267/TLE4267-2 - INH/HOLD FunctionEN244 KB27 四月 201501_33
Product Selection Guide
TitleSizeDateVersion
Automotive Power Selection GuideEN10.6 MB19 一月 201601_01
Material Content SheetInfo
TitleSizeDateVersion
MCDS_2016-04-18_08-46-23_MA001079640_PG-SOT223-4-23.pdfEN23 KB18 四月 201601_00
PCB Design Data
TitleSizeDateVersion
PCB Footprints & Symbols - Altium - v1.03.6 MB02 十月 201301_00
PCB Footprints & Symbols - Cadence - v1.02.6 MB02 十月 201301_00
PCB Footprints & Symbols - Eagle - v1.0569 KB02 十月 201301_00
PCB Footprints & Symbols - Mentor - v1.03.5 MB02 十月 201301_00
Evaluation Boards
BoardFamilyDescriptionStatus
TLS810C1EJV33 BOARDLinear Voltage RegulatorThe TLS810C1EJV33 is a linear voltage regulator of wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 8.5μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810C1EJV33 is available in 3.3V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. With extended operating range down to 2.75V, TLS810C1EJV33 is also suitable to supply automotive systems operating during cranking condition. TLS810C1EJV33 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.Channel=ff80808112ab681d0112ab69bfb202efTLS810C1EJV33on request
TLS810D1EJV50 BOARDLinear Voltage RegulatorThe TLS810D1EJV50 is a linear voltage regulator featuring wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 9μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810D1EJV50 is available in 5.0V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. The device can be switched on and off by the Enable feature leading to a current consumption of less than 1μA. With extended operating range down to 2.75V, TLS810D1EJV50 is also suitable to supply automotive systems operating during cranking condition. TLS810D1EJV50 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.TLS810D1EJV50on request
Package Data
TitleSizeDateVersion
PG-SOT223-4-23 | TLE42662GHTMA2EN449 KB11 四月 201601_00
P-SOT223-4-7 | TLE42662GNTMA1EN366 KB11 四月 201601_00
PCB Design Data
TitleSizeDateVersion
PCB Footprints & Symbols - Altium - v1.03.6 MB02 十月 201301_00
PCB Footprints & Symbols - Cadence - v1.02.6 MB02 十月 201301_00
PCB Footprints & Symbols - Eagle - v1.0569 KB02 十月 201301_00
PCB Footprints & Symbols - Mentor - v1.03.5 MB02 十月 201301_00
EN TLE4266-2GS+V33
What the designer should know: introduction to Automotive Linear Voltage Regulator linear-post-regulators
EN TLE42764D+V50
EN TLE8203E
EN TLE4266-2G
EN TLE4266-2G
EN TLE4266-2G
PCB Footprints & Symbols - Altium - v1.0 IFX1763XEJ+V33
PCB Footprints & Symbols - Cadence - v1.0 IFX1763XEJ+V33
PCB Footprints & Symbols - Eagle - v1.0 IFX1763XEJ+V33
PCB Footprints & Symbols - Mentor - v1.0 IFX1763XEJ+V33