TLE42694GM

The TLE42694 is a monolithic integrated low dropout voltage regulator, especially designed for automotive applications. An input voltage up to 45 V is regulated to an output voltage of 5.0 V. The component is able to drive loads up to 150 mA. It is short-circuit proof by the implemented output current limitation and has an integrated over temperature shutdown. A reset signal is generated for an output voltage V Q,rt of typically 4.65 V. The power-on reset delay time can be programmed by the external delay capacitor. The additional sense comparator provides an early warning function: Any voltage (e.g. the input voltage) can be monitored, an under-voltage condition is indicated by setting the comparator’s output to low. The reset and sense output are internally connected to the output Q via a pull-up resistor. If these integrated resistors are not desired, the TLE42794 can be used instead of the TLE42694.

ParametricTLE42694GM
Operating Voltage  min  max5.5V  45.0V
Output Voltage Type5.0V
Accuracy2.0%
Output Current (max.)100mA
Regulator TypeLinear
Dropout Voltage250mV
Quiescent Current210µA
Operating Temperature  min  max-40.0°C  150.0°C
Over Voltage Protectionno
Enable (=Inhibit)no
Resetyes
Power Failno
Power Goodno
Status Outputno
Holdno
Watchdogno
Early Warningyes
Automotive Qualifiedyes
Sales Product NameTLE42694GM
OPNTLE42694GMXUMA1
Product Statusactive and preferred
Package NamePG-DSO-14
Completely lead freeyes
Halogen freeyes
RoHS compliantyes
Packing Size2500
Packing TypeTAPE & REEL
Moisture Level3
Summary of Features:
  • Output Voltage 5 V ± 2%
  • Ouput Current up to 150 mA
  • Very Low Current Consumption
  • Early Warning
  • Power-on and Undervoltage Reset with Programmable Delay Time
  • Reset Low Down to V Q  = 1 V
  • Adjustable Reset Threshold
  • Very Low Dropout Voltage
  • Output Current Limitation
  • Reverse Polarity Protection
  • Overtemperature Protection
  • Suitable for Use in Automotive Electronics
  • Wide Temperature Range from -40 °C up to 150 °C
  • Input Voltage Range from -42 V to 45 V
  • Integrated Pull-Up Resistors at Logic Outputs
  • Green Product (RoHS compliant)
  • AEC Qualified
Benefits:
  • Robust Protection Features
  • Wide Input Operation and Temperature Range
Target Applications:
  • Automotive General
功能框图
Data Sheet
TitleSizeDateVersion
TLE42694_DS1.3 MB15 七月 201401_03
Product Brochure
TitleSizeDateVersion
What the designer should know: introduction to Automotive Linear Voltage Regulator3.9 MB17 七月 2014
Application Notes
TitleSizeDateVersion
TLE4267/TLE4267-2 - INH/HOLD FunctionEN244 KB27 四月 201501_33
Product Selection Guide
TitleSizeDateVersion
Automotive Power Selection GuideEN10.6 MB19 一月 201601_01
Material Content SheetInfo
TitleSizeDateVersion
MCDS_2013-08-28_22-54-26_MA000970068_PG-DSO-14-30.pdf23 KB31 十月 201301_00
PCB Design Data
TitleSizeDateVersion
PCB Footprints & Symbols - Altium - v1.03.6 MB02 十月 201301_00
PCB Footprints & Symbols - Cadence - v1.02.6 MB02 十月 201301_00
PCB Footprints & Symbols - Eagle - v1.0569 KB02 十月 201301_00
PCB Footprints & Symbols - Mentor - v1.03.5 MB02 十月 201301_00
Evaluation Boards
BoardFamilyDescriptionStatus
TLS810C1EJV33 BOARDLinear Voltage RegulatorThe TLS810C1EJV33 is a linear voltage regulator of wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 8.5μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810C1EJV33 is available in 3.3V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. With extended operating range down to 2.75V, TLS810C1EJV33 is also suitable to supply automotive systems operating during cranking condition. TLS810C1EJV33 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.Channel=ff80808112ab681d0112ab69bfb202efTLS810C1EJV33on request
TLS810D1EJV50 BOARDLinear Voltage RegulatorThe TLS810D1EJV50 is a linear voltage regulator featuring wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 9μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810D1EJV50 is available in 5.0V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. The device can be switched on and off by the Enable feature leading to a current consumption of less than 1μA. With extended operating range down to 2.75V, TLS810D1EJV50 is also suitable to supply automotive systems operating during cranking condition. TLS810D1EJV50 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.TLS810D1EJV50on request
Package Data
TitleSizeDateVersion
PG-DSO-14-30 | TLE42694GMXUMA1EN505 KB11 四月 201601_00
PCB Design Data
TitleSizeDateVersion
PCB Footprints & Symbols - Altium - v1.03.6 MB02 十月 201301_00
PCB Footprints & Symbols - Cadence - v1.02.6 MB02 十月 201301_00
PCB Footprints & Symbols - Eagle - v1.0569 KB02 十月 201301_00
PCB Footprints & Symbols - Mentor - v1.03.5 MB02 十月 201301_00
TLE42694_DS TLE42694GM
What the designer should know: introduction to Automotive Linear Voltage Regulator linear-post-regulators
EN TLE42764D+V50
EN TLE8203E
MCDS_2013-08-28_22-54-26_MA000970068_PG-DSO-14-30.pdf TLE42694GM
EN TLE42694GM
PCB Footprints & Symbols - Altium - v1.0 IFX1763XEJ+V33
PCB Footprints & Symbols - Cadence - v1.0 IFX1763XEJ+V33
PCB Footprints & Symbols - Eagle - v1.0 IFX1763XEJ+V33
PCB Footprints & Symbols - Mentor - v1.0 IFX1763XEJ+V33