TLE4269GL

This device an automotive suited voltage regulator with a fixed 5-V output. The maximum operating voltage is 45 V. The output is able to drive 150 mA load. It is short circuit protected and the thermal shutdown switches the output off if the junction temperature is in excess of 150 ° C. A reset signal is generated for an output voltage of V Q < 4.65 V. The reset threshold voltage can be decreased by external connection of a voltage divider. The reset delay time can be set by an external capacitor. Reset and sense output have integrated pull-up resistors. If the integrated resistors are not desired TLE 4279 can be used. It is also possible to supervise the input voltage by using an integrated comparator to give a low voltage warning.

ParametricTLE4269GL
Operating Voltage  min  max5.5V  45.0V
Output Voltage Type5V
Accuracy2.0%
Output Current (max.)100mA
Regulator TypeLinear
Dropout Voltage250mV
Quiescent Current240µA
Operating Temperature  min  max-40.0°C  150.0°C
Over Voltage Protectionno
Enable (=Inhibit)no
Resetyes
Power Failno
Power Goodno
Status Outputno
Holdno
Watchdogno
Early Warningyes
Automotive Qualifiedyes
Sales Product NameTLE4269GL
OPNTLE4269GLXUMA2
Product Statusactive and preferred
Package NamePG-DSO-20
Completely lead freeyes
Halogen freeyes
RoHS compliantyes
Packing Size1000
Packing TypeTAPE & REEL
Moisture Level3
Summary of Features:
  • Output voltage tolerance  ≤   ± 2%
  • 150 mA current capability
  • Very low current consumption
  • Early warning
  • Reset output low down to V Q = 1 V
  • Over temperature protection
  • Reverse polarity proof
  • Adjustable reset threshold
  • Very low drop voltage
  • Wide temperature range
  • Integrated pull-up resistor at logic outputs
  • Green Product (RoHS compliant)
  • AEC Qualified
Benefits:
  • Robust protection features
  • Wide input operation and temperature range
Target Applications:
  • Automotive general
功能框图
Data Sheet
TitleSizeDateVersion
TLE4269,EN358 KB03 九月 200802_04
Product Brochure
TitleSizeDateVersion
What the designer should know: introduction to Automotive Linear Voltage Regulator3.9 MB17 七月 2014
Application Notes
TitleSizeDateVersion
TLE4267/TLE4267-2 - INH/HOLD Function；EN244 KB27 四月 201501_33
Product Selection Guide
TitleSizeDateVersion
Automotive Power Selection Guide；EN10.6 MB19 一月 201601_01
Material Content SheetInfo
TitleSizeDateVersion
MCDS_2013-08-28_23-06-18_MA000835162_PG-DSO-20-35.pdf23 KB31 十月 201301_00
PCB Design Data
TitleSizeDateVersion
PCB Footprints & Symbols - Altium - v1.03.6 MB02 十月 201301_00
PCB Footprints & Symbols - Cadence - v1.02.6 MB02 十月 201301_00
PCB Footprints & Symbols - Eagle - v1.0569 KB02 十月 201301_00
PCB Footprints & Symbols - Mentor - v1.03.5 MB02 十月 201301_00
Evaluation Boards
BoardFamilyDescriptionStatus
TLS810C1EJV33 BOARDLinear Voltage RegulatorThe TLS810C1EJV33 is a linear voltage regulator of wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 8.5μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810C1EJV33 is available in 3.3V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. With extended operating range down to 2.75V, TLS810C1EJV33 is also suitable to supply automotive systems operating during cranking condition. TLS810C1EJV33 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.Channel=ff80808112ab681d0112ab69bfb202efTLS810C1EJV33on request
TLS810D1EJV50 BOARDLinear Voltage RegulatorThe TLS810D1EJV50 is a linear voltage regulator featuring wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 9μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810D1EJV50 is available in 5.0V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. The device can be switched on and off by the Enable feature leading to a current consumption of less than 1μA. With extended operating range down to 2.75V, TLS810D1EJV50 is also suitable to supply automotive systems operating during cranking condition. TLS810D1EJV50 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.TLS810D1EJV50on request
Package Data
TitleSizeDateVersion
PG-DSO-20-66 | TLE4269GLXUMA2；EN465 KB11 四月 201601_00
PCB Design Data
TitleSizeDateVersion
PCB Footprints & Symbols - Altium - v1.03.6 MB02 十月 201301_00
PCB Footprints & Symbols - Cadence - v1.02.6 MB02 十月 201301_00
PCB Footprints & Symbols - Eagle - v1.0569 KB02 十月 201301_00
PCB Footprints & Symbols - Mentor - v1.03.5 MB02 十月 201301_00
EN TLE4269GM
What the designer should know: introduction to Automotive Linear Voltage Regulator linear-post-regulators
EN TLE42764D+V50
EN TLE8203E
MCDS_2013-08-28_23-06-18_MA000835162_PG-DSO-20-35.pdf TLE4269GL
EN TLE4269GL
PCB Footprints & Symbols - Altium - v1.0 IFX1763XEJ+V33
PCB Footprints & Symbols - Cadence - v1.0 IFX1763XEJ+V33
PCB Footprints & Symbols - Eagle - v1.0 IFX1763XEJ+V33
PCB Footprints & Symbols - Mentor - v1.0 IFX1763XEJ+V33
Products 产品服务
Manufacturers 生产厂家
联系购买Sales
©1993 - 2024 BDTIC