TLE4269GM infineon _ BDTIC 中国领先电子元器件代理商

TLE4269GM

This device an automotive suited voltage regulator with a fixed 5-V output. The maximum operating voltage is 45 V. The output is able to drive 150 mA load. It is short circuit protected and the thermal shutdown switches the output off if the junction temperature is in excess of 150 ° C. A reset signal is generated for an output voltage of V Q < 4.65 V. The reset threshold voltage can be decreased by external connection of a voltage divider. The reset delay time can be set by an external capacitor. Reset and sense output have integrated pull-up resistors. If the integrated resistors are not desired TLE 4279 can be used. It is also possible to supervise the input voltage by using an integrated comparator to give a low voltage warning.

Parametric	TLE4269GM
Operating Voltage min max	5.5V 45.0V
Output Voltage Type	5.0V
Accuracy	2.0%
Output Current (max.)	100mA
Regulator Type	Linear
Dropout Voltage	250mV
Quiescent Current	240µA
Operating Temperature min max	-40.0°C 150.0°C
Over Voltage Protection	no
Enable (=Inhibit)	no
Reset	yes
Power Fail	no
Power Good	no
Status Output	no
Hold	no
Watchdog	no
Early Warning	yes
Automotive Qualified	yes

Sales Product Name	TLE4269GM
OPN	TLE4269GMXUMA1
Product Status	not for new design
Package Name	PG-DSO-14
Completely lead free	yes
Halogen free	yes
RoHS compliant	yes
Packing Size	2500
Packing Type	TAPE & REEL

Summary of Features:

Output Voltage Tolerance ≤ ± 2%
150 mA Current Capability
Very low Current Consumption
Early Warning
Reset Output Low Down to V Q = 1 V
Overtemperature Protection
Reverse Polarity Proof
Adjustable Reset Threshold
Very Low Drop Voltage
Wide Temperature Range
Integrated Pull-up Resistor at Logic Outputs
Green Product (RoHS compliant)
AEC Qualified

Benefits:

Robust Protection Features
Wide Input Operation and Temperature Range

Target Applications:

Automotive General

功能框图

Data Sheet

Title	Size	Date	Version
TLE4269,EN	358 KB	03 九月 2008	02_04

Product Brochure

Title	Size	Date	Version
What the designer should know: introduction to Automotive Linear Voltage Regulator	3.9 MB	17 七月 2014

Application Notes

Title	Size	Date	Version
TLE4267/TLE4267-2 - INH/HOLD Function；EN	244 KB	27 四月 2015	01_33

Product Selection Guide

Title	Size	Date	Version
Automotive Power Selection Guide；EN	10.6 MB	19 一月 2016	01_01

Material Content SheetInfo

Title	Size	Date	Version
MCDS_2013-08-29_00-08-50_MA000969912_PG-DSO-14-30.pdf	23 KB	31 十月 2013	01_00

PCB Design Data

Title	Size	Date	Version
PCB Footprints & Symbols - Altium - v1.0	3.6 MB	02 十月 2013	01_00
PCB Footprints & Symbols - Cadence - v1.0	2.6 MB	02 十月 2013	01_00
PCB Footprints & Symbols - Eagle - v1.0	569 KB	02 十月 2013	01_00
PCB Footprints & Symbols - Mentor - v1.0	3.5 MB	02 十月 2013	01_00

Evaluation Boards

Board	Family	Description	Status
TLS810C1EJV33 BOARD	Linear Voltage Regulator	The TLS810C1EJV33 is a linear voltage regulator of wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 8.5μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810C1EJV33 is available in 3.3V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. With extended operating range down to 2.75V, TLS810C1EJV33 is also suitable to supply automotive systems operating during cranking condition. TLS810C1EJV33 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.Channel=ff80808112ab681d0112ab69bfb202efTLS810C1EJV33	on request
TLS810D1EJV50 BOARD	Linear Voltage Regulator	The TLS810D1EJV50 is a linear voltage regulator featuring wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 9μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810D1EJV50 is available in 5.0V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. The device can be switched on and off by the Enable feature leading to a current consumption of less than 1μA. With extended operating range down to 2.75V, TLS810D1EJV50 is also suitable to supply automotive systems operating during cranking condition. TLS810D1EJV50 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.TLS810D1EJV50	on request

PCB Design Data

Title	Size	Date	Version
PCB Footprints & Symbols - Altium - v1.0	3.6 MB	02 十月 2013	01_00
PCB Footprints & Symbols - Cadence - v1.0	2.6 MB	02 十月 2013	01_00
PCB Footprints & Symbols - Eagle - v1.0	569 KB	02 十月 2013	01_00
PCB Footprints & Symbols - Mentor - v1.0	3.5 MB	02 十月 2013	01_00