TLE4270-2G

This device is a 5-V low drop fixed-voltage regulator. The maximum input voltage is 42 V (65 V, ≤ 400 ms). Up to an input voltage of 26 V and for an output current up to 650 mA it regulates the output voltage within a 2% accuracy. The short circuit protection limits the output current of more than 650 mA. The device incorporates overvoltage protection and a temperature protection which turns off the device at high temperatures.

ParametricTLE4270-2G
Operating Voltage  min  max6.0V  42.0V
Output Voltage Type5.0V
Accuracy2.0%
Output Current (max.)550mA
Regulator TypeLinear
Dropout Voltage350mV
Quiescent Current1000µA
Operating Temperature  min  max-40.0°C  150.0°C
Over Voltage Protectionyes
Enable (=Inhibit)no
Resetyes
Power Failno
Power Goodno
Status Outputno
Holdno
Watchdogno
Early Warningno
Automotive Qualifiedyes
Sales Product NameTLE4270-2G
OPNTLE42702GATMA1
Product Statusactive and preferred
Package NamePG-TO263-5
Completely lead freeno
Halogen freeyes
RoHS compliantyes
Packing Size1000
Packing TypeTAPE & REEL
Moisture Level1
Summary of Features:
  • Output voltage tolerance  ≤   ± 2%
  • 650 mA output current capability
  • Low-drop voltage
  • Reset functionality
  • Adjustable reset time
  • Suitable for use in automotive electronics
  • Integrated overtemperature protection
  • Reverse polarity protection
  • Input voltage up to 42 V
  • Overvoltage protection up to 65 V ( ≤  400 ms)
  • Short-circuit proof
  • Wide temperature range
  • ESD protection:  ± 2kV HBM 1)
  • Green Product (RoHS compliant)
  • AEC Qualified
Benefits:
  • Robust protection features
  • Wide input operation and temperature range
  • Integrated overvoltage detection
Target Applications:
  • Automotive general
  • Truck(commercial vehicle) control units
功能框图
Data Sheet
TitleSizeDateVersion
TLE 4270-2,EN245 KB09 十一月 200701_08
Product Brochure
TitleSizeDateVersion
What the designer should know: introduction to Automotive Linear Voltage Regulator3.9 MB17 七月 2014
Application Notes
TitleSizeDateVersion
Recommendations for Assembly of Infineon TO Packages1.2 MB04 七月 2013
TLE4267/TLE4267-2 - INH/HOLD Function；EN244 KB27 四月 201501_33
Product Selection Guide
TitleSizeDateVersion
Automotive Power Selection Guide；EN10.6 MB19 一月 201601_01
Material Content SheetInfo
TitleSizeDateVersion
MCDS_2013-08-28_22-54-13_MA000714122_PG-TO263-5-1.pdf24 KB31 十月 201301_00
PCB Design Data
TitleSizeDateVersion
PCB Footprints & Symbols - Altium - v1.03.6 MB02 十月 201301_00
PCB Footprints & Symbols - Cadence - v1.02.6 MB02 十月 201301_00
PCB Footprints & Symbols - Eagle - v1.0569 KB02 十月 201301_00
PCB Footprints & Symbols - Mentor - v1.03.5 MB02 十月 201301_00
Evaluation Boards
BoardFamilyDescriptionStatus
TLS810C1EJV33 BOARDLinear Voltage RegulatorThe TLS810C1EJV33 is a linear voltage regulator of wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 8.5μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810C1EJV33 is available in 3.3V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. With extended operating range down to 2.75V, TLS810C1EJV33 is also suitable to supply automotive systems operating during cranking condition. TLS810C1EJV33 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.Channel=ff80808112ab681d0112ab69bfb202efTLS810C1EJV33on request
TLS810D1EJV50 BOARDLinear Voltage RegulatorThe TLS810D1EJV50 is a linear voltage regulator featuring wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 9μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810D1EJV50 is available in 5.0V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. The device can be switched on and off by the Enable feature leading to a current consumption of less than 1μA. With extended operating range down to 2.75V, TLS810D1EJV50 is also suitable to supply automotive systems operating during cranking condition. TLS810D1EJV50 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.TLS810D1EJV50on request
Package Data
TitleSizeDateVersion
PG-TO263-5-1 | TLE42702GATMA1；EN470 KB11 四月 201601_00
PCB Design Data
TitleSizeDateVersion
PCB Footprints & Symbols - Altium - v1.03.6 MB02 十月 201301_00
PCB Footprints & Symbols - Cadence - v1.02.6 MB02 十月 201301_00
PCB Footprints & Symbols - Eagle - v1.0569 KB02 十月 201301_00
PCB Footprints & Symbols - Mentor - v1.03.5 MB02 十月 201301_00
EN TLE4270-2G
What the designer should know: introduction to Automotive Linear Voltage Regulator linear-post-regulators
Recommendations for Assembly of Infineon TO Packages IFX21004TN+V51
EN TLE42764D+V50
EN TLE8203E
MCDS_2013-08-28_22-54-13_MA000714122_PG-TO263-5-1.pdf TLE4270-2G
EN TLE4270-2G
PCB Footprints & Symbols - Altium - v1.0 IFX1763XEJ+V33
PCB Footprints & Symbols - Cadence - v1.0 IFX1763XEJ+V33
PCB Footprints & Symbols - Eagle - v1.0 IFX1763XEJ+V33
PCB Footprints & Symbols - Mentor - v1.0 IFX1763XEJ+V33
Products 产品服务
Manufacturers 生产厂家
联系购买Sales
©1993 - 2024 BDTIC