TLE4286G

The TLE 4286 G is a 5-V low-drop fixed voltage regulator in the very small SMD package PG-SCT-595-5. The maximum input voltage is 42 V. The output is able to drive a load of more than 10 mA while it regulates the output voltage within a 4% accuracy. The device can be switched in stand-by mode via an inhibit input which causes the current consumption to drop below 1 µA. A temperature protection disables the IC at over temperature.

ParametricTLE4286G
Operating Voltage  min  max6.0V  42.0V
Output Voltage Type5.0V
Accuracy4.0%
Output Current (max.)10mA
Regulator TypeLinear
Dropout Voltage800mV
Quiescent Current60µA
Operating Temperature  min  max-40.0°C  150.0°C
Over Voltage Protectionno
Enable (=Inhibit)yes
Resetno
Power Failno
Power Goodno
Status Outputno
Holdno
Watchdogno
Early Warningno
Automotive Qualifiedyes
Sales Product NameTLE4286G
OPNTLE4286GHTSA1
Product Statusactive and preferred
Package NamePG-SCT595-5
Completely lead freeyes
Halogen freeno
RoHS compliantyes
Packing Size3000
Packing TypeTAPE & REEL
Moisture Level1
OPNTLE4286GNTSA1
Product Statusdiscontinued
Package NamePG-SCT595-5
Completely lead freeno
Halogen freeno
RoHS compliantno
Packing Size3000
Packing TypeTAPE & REEL
Moisture Level
Summary of Features:
  • 15 mA output current capability
  • 1  µA current consumption in standby mode
  • Low quiescent current consumption 60  µA in ON mode
  • Inhibit input
  • Very small SMD-Package PG-SCT-595-5
  • Wide operation range: 6.2 V to 42 V
  • Wide temperature range: -40  ° C to 150  ° C
  • Output protected against short circuit
  • Over temperature protection
  • Green product (RoHS compliant)
  • AEC qualified.
Benefits:
  • Robust protection features
  • Wide input operation and temperature range
Target Applications:
  • Automotive general
功能框图
Data Sheet
TitleSizeDateVersion
TLE4286,EN234 KB20 七月 201202_03
Product Brochure
TitleSizeDateVersion
What the designer should know: introduction to Automotive Linear Voltage Regulator3.9 MB17 七月 2014
Application Notes
TitleSizeDateVersion
TLE4267/TLE4267-2 - INH/HOLD Function；EN244 KB27 四月 201501_33
Product Selection Guide
TitleSizeDateVersion
Automotive Power Selection Guide；EN10.6 MB19 一月 201601_01
PCB Design Data
TitleSizeDateVersion
PCB Footprints & Symbols - Altium - v1.03.6 MB02 十月 201301_00
PCB Footprints & Symbols - Cadence - v1.02.6 MB02 十月 201301_00
PCB Footprints & Symbols - Eagle - v1.0569 KB02 十月 201301_00
PCB Footprints & Symbols - Mentor - v1.03.5 MB02 十月 201301_00
Evaluation Boards
BoardFamilyDescriptionStatus
TLS810C1EJV33 BOARDLinear Voltage RegulatorThe TLS810C1EJV33 is a linear voltage regulator of wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 8.5μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810C1EJV33 is available in 3.3V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. With extended operating range down to 2.75V, TLS810C1EJV33 is also suitable to supply automotive systems operating during cranking condition. TLS810C1EJV33 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.Channel=ff80808112ab681d0112ab69bfb202efTLS810C1EJV33on request
TLS810D1EJV50 BOARDLinear Voltage RegulatorThe TLS810D1EJV50 is a linear voltage regulator featuring wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 9μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810D1EJV50 is available in 5.0V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. The device can be switched on and off by the Enable feature leading to a current consumption of less than 1μA. With extended operating range down to 2.75V, TLS810D1EJV50 is also suitable to supply automotive systems operating during cranking condition. TLS810D1EJV50 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.TLS810D1EJV50on request
PCB Design Data
TitleSizeDateVersion
PCB Footprints & Symbols - Altium - v1.03.6 MB02 十月 201301_00
PCB Footprints & Symbols - Cadence - v1.02.6 MB02 十月 201301_00
PCB Footprints & Symbols - Eagle - v1.0569 KB02 十月 201301_00
PCB Footprints & Symbols - Mentor - v1.03.5 MB02 十月 201301_00
EN TLE4286G
What the designer should know: introduction to Automotive Linear Voltage Regulator linear-post-regulators
EN TLE42764D+V50
EN TLE8203E
PCB Footprints & Symbols - Altium - v1.0 IFX1763XEJ+V33
PCB Footprints & Symbols - Cadence - v1.0 IFX1763XEJ+V33
PCB Footprints & Symbols - Eagle - v1.0 IFX1763XEJ+V33
PCB Footprints & Symbols - Mentor - v1.0 IFX1763XEJ+V33
Products 产品服务
Manufacturers 生产厂家
联系购买Sales
©1993 - 2024 BDTIC