TLE4473G V53

The TLE 4473 is a monolithic integrated voltage regulator with two very low-drop outputs, Q1 for loads up to 300 mA and Q2 providing a maximum of 180 mA. An input voltage in the range of 5.6 V ≤ V I ≤ 45 V is transformed to V Q2 = 5.0 V ( ± 2%) and V Q1 = 3.3 V ± 3% (TLE 4473 GV53) or VQ1 = 2.6 V ± 3% (TLE 4473 GV52). The device is also available with dual 5 V output voltage, please refer to the TLE 4473 GV55 data sheet. Two inhibit pins allow a flexible power management. Both outputs can independently be enabled or disabled. Thus the current consumption of the application can be reduced to a minimum. The quiescent current of the TLE 4473 with both outputs disabled is < 1 µ A. The TLE 4473 is designed to supply microprocessor systems and sensors under the severe conditions of automotive applications and is therefore equipped with additional protection functions against overload, short circuit and over temperature.

ParametricTLE4473G V53
Operating Voltage  min  max5.6V  42.0V
Output Voltage Type3.3V
Accuracy2.0%
Accuracy3.0%
Output Current (max.)300mA
Regulator TypeLinear->Multiple output
Dropout Voltage300mV
Quiescent Current250µA
Operating Temperature  min  max-40.0°C  150.0°C
Over Voltage Protectionno
Enable (=Inhibit)yes
Resetyes
Power Failno
Power Goodno
Status Outputno
Holdno
Watchdogyes
Early Warningno
Automotive Qualifiedyes
Sales Product NameTLE4473G V53
OPNTLE4473GV53AUMA2
Product Statusactive and preferred
Package NamePG-DSO-12
Completely lead freeno
Halogen freeyes
RoHS compliantyes
Packing Size1000
Packing TypeTAPE & REEL
Moisture Level3
OPNTLE4473GV53AUMA1
Product Statusdiscontinued
Package NamePG-DSO-12
Completely lead freeno
Halogen freeyes
RoHS compliantyes
Packing Size1000
Packing TypeTAPE & REEL
Moisture Level
Summary of Features:
  • Output 1: 300 mA, 3.3 V ( ± 3%) or 2.6 V ( ± 3%)
  • Output 2: 180 mA, 5 V ( ± 2%)
  • Low Quiescent Current Consumption
  • Disable Function Separately for Both Outputs
  • Wide Operation Range: up to 42 V
  • Very low Dropout Voltage
  • 2 Independent Reset Circuits
  • Watchdog
  • Output Protected against Short Circuit
  • Wide Temperature Range: -40  ° C to 150  ° C
  • Over Temperature Protection
  • Overload Protection
Benefits:
  • Robust Protection Features
  • Wide Input Operation and Temperature Range
Target Applications:
  • Automotive General
Data Sheet
TitleSizeDateVersion
TLE4473GV53_DS,EN287 KB07 四月 200901_01
Product Brochure
TitleSizeDateVersion
What the designer should know: introduction to Automotive Linear Voltage Regulator3.9 MB17 七月 2014
Application Notes
TitleSizeDateVersion
TLE4267/TLE4267-2 - INH/HOLD FunctionEN244 KB27 四月 201501_33
Product Selection Guide
TitleSizeDateVersion
Automotive Power Selection GuideEN10.6 MB19 一月 201601_01
PCB Design Data
TitleSizeDateVersion
PCB Footprints & Symbols - Altium - v1.03.6 MB02 十月 201301_00
PCB Footprints & Symbols - Cadence - v1.02.6 MB02 十月 201301_00
PCB Footprints & Symbols - Eagle - v1.0569 KB02 十月 201301_00
PCB Footprints & Symbols - Mentor - v1.03.5 MB02 十月 201301_00
Evaluation Boards
BoardFamilyDescriptionStatus
TLS810C1EJV33 BOARDLinear Voltage RegulatorThe TLS810C1EJV33 is a linear voltage regulator of wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 8.5μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810C1EJV33 is available in 3.3V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. With extended operating range down to 2.75V, TLS810C1EJV33 is also suitable to supply automotive systems operating during cranking condition. TLS810C1EJV33 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.Channel=ff80808112ab681d0112ab69bfb202efTLS810C1EJV33on request
TLS810D1EJV50 BOARDLinear Voltage RegulatorThe TLS810D1EJV50 is a linear voltage regulator featuring wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 9μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810D1EJV50 is available in 5.0V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. The device can be switched on and off by the Enable feature leading to a current consumption of less than 1μA. With extended operating range down to 2.75V, TLS810D1EJV50 is also suitable to supply automotive systems operating during cranking condition. TLS810D1EJV50 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.TLS810D1EJV50on request
Package Data
TitleSizeDateVersion
PG-DSO-12-11 | TLE4473GV53AUMA2EN618 KB11 四月 201601_00
PCB Design Data
TitleSizeDateVersion
PCB Footprints & Symbols - Altium - v1.03.6 MB02 十月 201301_00
PCB Footprints & Symbols - Cadence - v1.02.6 MB02 十月 201301_00
PCB Footprints & Symbols - Eagle - v1.0569 KB02 十月 201301_00
PCB Footprints & Symbols - Mentor - v1.03.5 MB02 十月 201301_00
EN TLE4473G+V53
What the designer should know: introduction to Automotive Linear Voltage Regulator linear-post-regulators
EN TLE42764D+V50
EN TLE8203E
EN TLE4473G+V53
PCB Footprints & Symbols - Altium - v1.0 IFX1763XEJ+V33
PCB Footprints & Symbols - Cadence - v1.0 IFX1763XEJ+V33
PCB Footprints & Symbols - Eagle - v1.0 IFX1763XEJ+V33
PCB Footprints & Symbols - Mentor - v1.0 IFX1763XEJ+V33