TLE4699GM infineon _ BDTIC 中国领先电子元器件代理商

TLE4699GM

The TLE4699 is a monolithic integrated low drop out fixed output voltage regulator for loads up to 200 mA. An input voltage of up to 45 V is regulated to an output voltage of 5 V. The integrated reset as well as several protection circuits, combined with a wide operating temperature range offered by the TLE4699 make it suitable for supplying microprocessor systems in automotive environments. The early warning function supervises the voltage at pin SI. Modifying the reset threshold is possible by an optional resistor divider. The TLE4699 is available in a PG-DSO-14 package which makes it pin-compatible to the TLE4299 as well as in a small thermally enhanced PG-SSOP-14 EP exposed pad package.

Parametric	TLE4699GM
Operating Voltage min max	3.3V 45.0V
Output Voltage Type	5.0V
Accuracy	2.0%
Output Current (max.)	200mA
Regulator Type	Linear
Dropout Voltage	160mV
Quiescent Current	65µA
Operating Temperature min max	-40.0°C 150.0°C
Over Voltage Protection	no
Enable (=Inhibit)	yes
Reset	yes
Power Fail	no
Power Good	no
Status Output	no
Hold	no
Watchdog	no
Early Warning	yes

Sales Product Name	TLE4699GM
OPN	TLE4699GMXUMA1
Product Status	active and preferred
Package Name	PG-DSO-14
Completely lead free	yes
Halogen free	yes
RoHS compliant	yes
Packing Size	2500
Packing Type	TAPE & REEL

Summary of Features:

Output Voltage 5 V ± 2%
Current Capability 200 mA
Ultra Low Current Consumption
Very Low Drop Out Voltage
Enable Function: Below 1µA Current Consumption in off mode
Reset Circuit Sensing the Output Voltage with Programmable Switching Threshold and Delay Time
Reset Output Active Low Down to V Q = 1 V
Integrated Early Warning Comparator
Excellent Line Transient Robustness
Maximum Input Voltage -42 V ≤ V I ≤ +45 V
Reverse Polarity Protection
Short Circuit Protected
Over temperature Shutdown
Automotive Temperature Range -40 °C ≤ T j ≤ 150 °C
Available in a small thermally enhanced PG-SSOP-14 EP package
Green Product (RoHS Compliant)
AEC Qualified

Benefits:

Robust Protection Features
Wide Input Operation and Temperature Range

Target Applications:

Automotive General

功能框图

Data Sheet

Title	Size	Date	Version
TLE4699-Data-Sheet-V10,EN	1.4 MB	08 十二月 2010	01_00

Product Brochure

Title	Size	Date	Version
What the designer should know: introduction to Automotive Linear Voltage Regulator	3.9 MB	17 七月 2014

Application Notes

Title	Size	Date	Version
TLE4267/TLE4267-2 - INH/HOLD Function；EN	244 KB	27 四月 2015	01_33

Product Selection Guide

Title	Size	Date	Version
Automotive Power Selection Guide；EN	10.6 MB	19 一月 2016	01_01

Material Content SheetInfo

Title	Size	Date	Version
MCDS_2013-08-28_23-02-39_MA000970054_PG-DSO-14-30.pdf	23 KB	31 十月 2013	01_00

PCB Design Data

Title	Size	Date	Version
PCB Footprints & Symbols - Altium - v1.0	3.6 MB	02 十月 2013	01_00
PCB Footprints & Symbols - Cadence - v1.0	2.6 MB	02 十月 2013	01_00
PCB Footprints & Symbols - Eagle - v1.0	569 KB	02 十月 2013	01_00
PCB Footprints & Symbols - Mentor - v1.0	3.5 MB	02 十月 2013	01_00

Evaluation Boards

Board	Family	Description	Status
TLS810C1EJV33 BOARD	Linear Voltage Regulator	The TLS810C1EJV33 is a linear voltage regulator of wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 8.5μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810C1EJV33 is available in 3.3V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. With extended operating range down to 2.75V, TLS810C1EJV33 is also suitable to supply automotive systems operating during cranking condition. TLS810C1EJV33 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.Channel=ff80808112ab681d0112ab69bfb202efTLS810C1EJV33	on request
TLS810D1EJV50 BOARD	Linear Voltage Regulator	The TLS810D1EJV50 is a linear voltage regulator featuring wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 9μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810D1EJV50 is available in 5.0V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. The device can be switched on and off by the Enable feature leading to a current consumption of less than 1μA. With extended operating range down to 2.75V, TLS810D1EJV50 is also suitable to supply automotive systems operating during cranking condition. TLS810D1EJV50 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.TLS810D1EJV50	on request

Package Data

Title	Size	Date	Version
PG-DSO-14-30 \| TLE4699GMXUMA1；EN	512 KB	11 四月 2016	01_00

PCB Design Data

Title	Size	Date	Version
PCB Footprints & Symbols - Altium - v1.0	3.6 MB	02 十月 2013	01_00
PCB Footprints & Symbols - Cadence - v1.0	2.6 MB	02 十月 2013	01_00
PCB Footprints & Symbols - Eagle - v1.0	569 KB	02 十月 2013	01_00
PCB Footprints & Symbols - Mentor - v1.0	3.5 MB	02 十月 2013	01_00