TLE7241E

The TLE 7241E is a dual channel constant current control solenoid driver with integrated DMOS power transistors. The average load current can be programmed to a value in the range of 0 mA to 1000 mA (with a 1 OHM external sense resistor) with 10 bits of resolution. Load current is controlled using a hysteretic control scheme with a programmable hysteresis value. A triangular “dither” waveform can be superimposed on the switching current waveform in order to improve the transfer function of the solenoid. The amplitude and frequency of the dither waveform are programmable by the SPI interface. The device is protected from damage due to over-current, overvoltage and over-temperature conditions, and is able to diagnose and report open loads, shorted loads, and loads shorted to ground.

ParametricTLE7241E
Channels2.0
Output Current1.2A
RDS (on) (multiple)2 x 0.45 Ohm
RDS (on) (multiple)240 mOhm
Quiescent Current1,0 mA
Operating Voltage  min  max9.0V  18.0V
SPI16.0Bit
CommentsDual Channel Constant Current Control Solenoid Driver
Sales Product NameTLE7241E
OPNTLE7241EXUMA2
Product Statusactive and preferred
Package NamePG-DSO-20
Completely lead freeyes
Halogen freeyes
RoHS compliantyes
Packing Size1000
Packing TypeTAPE & REEL
Moisture Level3
Summary of Features:
  • Two Fully Independent Channels
  • Integrated N-channel DMOS transistors
  • Programmable Average Current with 10-bit resolution via SPI
  • Iavg range = 0 to 1000 mA (typical)
  • Programmable Superimposed Dither
  • Programmable Frequency (41 Hz to 1 kHz typ.)
  • Programmable Amplitude (12.5 to 390 mVpp typ.)
  • Programmable Hysteresis (40 to 110 mVpp typ.)
  • Interface and Control
  • 16-bit SPI (Serial Peripheral Interface) daisy chainable
  • A single “Default” pin to disable both channels and reset the programmable registers of both channels
  • 5.0 V and 3.3 V logic compatible I/O
  • The contents of all registers can be verified via SPI
  • Operation with or without external reference possible
  • Protection
  • Over-current
  • Overvoltage
  • Over temperature
  • Diagnostics
  • Over-current / shorted solenoid
  • Over temperature
  • Open load
  • Short to GND
  • Green Product (RoHS compliant)
  • AEC Qualified
Target Applications:
  • Variable force solenoids (e.g. automatic transmission solenoids)
  • Constant current controlled solenoids like
  • Idle Speed Control
  • Exhaust Gas Recirculation
  • Valve control
  • Suspension Control
Data Sheet
TitleSizeDateVersion
Tle 7241E Data Sheet,EN2.5 MB24 二月 200901_01
Product Selection Guide
TitleSizeDateVersion
Automotive Power Selection GuideEN10.6 MB19 一月 201601_01
PCB Design Data
TitleSizeDateVersion
PCB Footprints & Symbols - Constant_Current_Control_IC_for_Transmission - Cadence - v1.076 KB16 十月 201301_00
PCB Footprints & Symbols - Constant_Current_Control_IC_for_Transmission - Eagle - v1.014 KB16 十月 201301_00
PCB Footprints & Symbols - Constant_Current_Control_IC_for_Transmission - Mentor - v1.080 KB16 十月 201301_00
PCB Footprints & Symbols - Constant_Current_Control_IC_for_Transmission - Altium - v1.082 KB16 十月 201301_00
Package Data
TitleSizeDateVersion
PG-DSO-20-67 | TLE7241EXUMA2EN604 KB11 四月 201601_00
PCB Design Data
TitleSizeDateVersion
PCB Footprints & Symbols - Constant_Current_Control_IC_for_Transmission - Cadence - v1.076 KB16 十月 201301_00
PCB Footprints & Symbols - Constant_Current_Control_IC_for_Transmission - Eagle - v1.014 KB16 十月 201301_00
PCB Footprints & Symbols - Constant_Current_Control_IC_for_Transmission - Mentor - v1.080 KB16 十月 201301_00
PCB Footprints & Symbols - Constant_Current_Control_IC_for_Transmission - Altium - v1.082 KB16 十月 201301_00
Development Tools
TitleSizeDateVersion
TLE7241E Evaluation Board - user guide3 MB16 二月 200901_01
EN TLE7241E
EN TLE8203E
EN TLE7241E
PCB Footprints & Symbols - Constant_Current_Control_IC_for_Transmission - Cadence - v1.0 TLE7242-2G
PCB Footprints & Symbols - Constant_Current_Control_IC_for_Transmission - Eagle - v1.0 TLE7242-2G
PCB Footprints & Symbols - Constant_Current_Control_IC_for_Transmission - Mentor - v1.0 TLE7242-2G
PCB Footprints & Symbols - Constant_Current_Control_IC_for_Transmission - Altium - v1.0 TLE7242-2G
TLE7241E Evaluation Board - user guide TLE7241E