TLS805D1LDV50
The TLS805D1 is a linear voltage regulator featuring wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75 V to 42 V and ultra low quiescent of only 9 μA, the regulator is perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS805D1LDV50 is the fixed 5 V output version with an accuracy of 2% and output current capability up to 50mA. The new regulation concept implemented in TLS805D1 combines fast regulation and very good stability while requiring only a small ceramic capacitor of 1 μF at the output. The tracking region starts already at input voltages of 2.75 V (extended operating range). This makes the TLS805D1 also suitable to supply automotive systems that need to operate during cranking condition. Internal protection features like output current limitation and overtemperature shutdown are implemented to protect the device against immediate damage due to failures like output short circuit to GND, over-current and over-temperature. The device can be switched on and off by the Enable feature. When the device is switched off, the current consumption is typically less than 1 μA. The output voltage is supervised by the Reset feature, including undervoltage reset and delayed reset release at power-on.
| Parametric | TLS805D1LDV50 |
|---|
| Operating Voltage
min
max | 2.75V
42.0V |
|---|
| Output Voltage Type | 5.0V |
|---|
| Accuracy | 2.0% |
|---|
| Output Current
(max.) | 50mA |
|---|
| Regulator Type | Linear->High Performance Regulators |
|---|
| Dropout Voltage | 100mV |
|---|
| Quiescent Current | 9.0µA |
|---|
| Operating Temperature
min
max | -40.0°C
150.0°C |
|---|
| Over Voltage Protection | yes |
|---|
| Enable (=Inhibit) | yes |
|---|
| Reset | yes |
|---|
| Power Fail | no |
|---|
| Power Good | no |
|---|
| Status Output | no |
|---|
| Hold | no |
|---|
| Watchdog | no |
|---|
| Early Warning | no |
|---|
| Sales Product Name | TLS805D1LDV50 |
|---|
| OPN | TLS805D1LDV50XUMA1 |
|---|
| Product Status | active and preferred |
|---|
| Package Name | PG-TSON-10 |
|---|
| Completely lead free | yes |
|---|
| Halogen free | yes |
|---|
| RoHS compliant | yes |
|---|
| Packing Size | 5000 |
|---|
| Packing Type | TAPE & REEL |
|---|
| Moisture Level | 2a |
|---|
| Summary of Features:- Ultra Low Quiescent Current of 9 μA
- Wide Input Voltage Range of 2.75 V to 42 V
- Output Current Capacity up to 50 mA
- Off Mode Current Less than 1 μA
- Low Drop Out Voltage of typ. 100mV @ 50 mA
- Output Current Limit Protection
- Overtemperature Shutdown
- Enable
- Reset
- Available in PG-TSON-10 Package
- Wide Temperature Range
- Green Product (RoHS Compliant)
- AEC Qualified
 |
Data Sheet
Product Brief
PCB Design Data
Evaluation Boards
| Board | Family | Description | Status |
|---|
| TLS810C1EJV33 BOARD | Linear Voltage Regulator | The TLS810C1EJV33 is a linear voltage regulator of wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 8.5μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810C1EJV33 is available in 3.3V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. With extended operating range down to 2.75V, TLS810C1EJV33 is also suitable to supply automotive systems operating during cranking condition. TLS810C1EJV33 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.Channel=ff80808112ab681d0112ab69bfb202efTLS810C1EJV33 | on request |
| TLS810D1EJV50 BOARD | Linear Voltage Regulator | The TLS810D1EJV50 is a linear voltage regulator featuring wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 9μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810D1EJV50 is available in 5.0V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. The device can be switched on and off by the Enable feature leading to a current consumption of less than 1μA. With extended operating range down to 2.75V, TLS810D1EJV50 is also suitable to supply automotive systems operating during cranking condition. TLS810D1EJV50 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.TLS810D1EJV50 | on request |
Simulation Models
PCB Design Data
