• 简体中文
• English

LTC1408-12 - 6 Channel, 12-Bit, 600ksps Simultaneous Sampling ADC with Shutdown

The LTC1408-12 contains six separate differential inputs that are sampled simultaneously on the rising edge of the CONV signal. These six sampled inputs are then converted at a rate of 100ksps per channel.

The 83dB common mode rejection allows users to eliminate ground loops and common mode noise by measuring signals differentially from the source.

The device converts 0V to 2.5V unipolar inputs differentially, or ±1.25V bipolar inputs also differentially, depending on the state of the BIP pin. Any analog input may swing rail-to-rail as long as the differential input range is maintained.

The conversion sequence can be abbreviated to convert fewer than six channels, depending on the logic state of the SEL2, SEL1 and SEL0 inputs.

The serial interface sends out the six conversion results in 96 clocks for compatibility with standard serial interfaces.

特点 600ksps ADC with 6 Simultaneously Sampled Differential Inputs 100ksps Throughput per Channel 72dB SINAD Low Power Dissipation: 15mW 3V Single Supply Operation 2.5V Internal Bandgap Reference, Can be Overdriven with External Reference 3-Wire SPI-Compatible Serial Interface 0V to 2.5V Unipolar, or ±1.25V Bipolar Differential Input Range SLEEP (6µW) Shutdown Mode NAP (3.3mW) Shutdown Mode Internal Conversion Triggered by CONV 83dB Common Mode Rejection Tiny 32-Pin (5mm × 5mm) QFN Package 典型应用

应用 Multiphase Power Measurement Multiphase Motor Control Data Acquisition Systems Uninterruptable Power Supplies 封装信息