• 简体中文
• English

LTC3713 - Low Input Voltage, High Power, No RSENSETM Synchronous Buck DC/DC Controller

The LTC®3713 is a high current, high efficiency synchronous buck switching regulator controller optimized for use with very low input supply voltages. It operates from inputs as low as 1.5V and provides a regulated output voltage from 0.8V up to (0.9)VIN. The controller uses a valley current control architecture to enable high operating frequencies without requiring a sense resistor.Operating frequency is selected by an external resistor and is compensated for variations in VIN and VOUT. The LTC3713 uses a pair of standard 5V logic-level N-channel external MOSFETs, eliminating the need for expensive P-channelor low threshold devices.

Discontinuous mode operation provides high efficiency operation at light loads. A forced continuous control pin reduces noise and RF interference, and can assist secondary winding regulation by disabling discontinuous operation when the main output is lightly loaded. Fault protection is provided by internal foldback current limiting,an output overvoltage comparator and an optional short-circuit shutdown timer.

特点 Very Low VIN(min): 1.5V True Current Mode Control 5V Drive for N-Channel MOSFETs Eliminates Auxillary 5V Supply No Sense Resistor Required Uses Standard 5V Logic-Level N-Channel MOSFETs Adjustable Current Limit Adjustable Frequency Switch tON(MIN) < 100ns 2% to 90% Duty Cycle at 200kHz 0.8V ±1% Reference Power Good Output Voltage Monitor Programmable Soft-Start Output Overvoltage Protection Optional Short-Circuit Shutdown Timer Small 24-Lead SSOP Package 典型应用

应用 Telecom Card 3.3V, 2.5V, 1.8V Step-Down Bus Termination (DDR memory, SSTL) Synchronous Buck with General Purpose Boost Low VIN Synchronous Boost 封装信息

演示电路板