MAX17552ATBEVKIT:Evaluation Kit for the MAX17552 (TDFN) in 5V Output Voltage Applications

The MAX17552 5V evaluation kit (EV kit) (TDFN) is a fully assembled and tested circuit board that demonstrates the performance of the MAX17552 60V, 100mA ultra-small, high-efficiency, synchronous step-down DC-DC converter in a 10-pin TDFN package. The EV kit operates over a wide input-voltage range of 6V to 60V and provides up to 100mA load current at 5V output. It draws only 26µA supply current under no-load conditions (EN/UVLO connected to VIN). The EV kit is programmed to switch at a frequency of 220kHz and delivers a peak efficiency of 93% with the supplied components. The device is simple to use and easily configurable with minimal external components. It features cycle-by-cycle peak current limit protection, undervoltage lockout, and thermal shutdown. The EV kit comes installed with the MAX17552ATB+ in an 10-pin (3mm x 3mm) lead(Pb)-free/RoHS-compliant TDFN package.

关键特性
  • 6V to 60V Input Voltage Range
  • 5V Output, 100mA Continuous Current
  • 93% Peak Efficiency
  • 26μA No Load Supply Current
  • EN/UVLO for On/Off Control and Programmable Input Undervoltage Lockout
  • Programmable Switching Frequency
  • Internal or Programmable Soft-Start
  • PFM or Forced-PWM Mode of Operation
  • Open-Drain RESET Output
  • Peak Current Limit Protection
  • Thermal Shutdown
  • Proven PCB Layout
  • Fully Assembled and Tested
应用
  • 电池供电设备
  • 通用负载点电源
  • 替代高压LDO
  • HVAC与楼宇控制
  • 工业传感器和过程控制
数据手册DataSheet
语言下载文件备注
英文MAX17552ATBEVKIT.pdfRev 0; 08/2014
订购型号
型号状况推荐替代产品封装
MAX17552ATBEVKIT#生产中EVKIT;
MAX17552ATBEVKIT.pdf MAX17552ATBEVKIT