数据手册:MAX2440, MAX2441, MAX2442 .pdf [英文Rev.3(PDF,208kB)]
{该产品的所有型号已经停产。}The MAX2440/MAX2441/MAX2442 highly integrated front-end receiver ICs provide the lowest cost solution for cordless phones and ISM-band radios operating in the 900MHz band. All devices incorporate receive image-reject mixers to reduce filter cost. They operate with a +2.7V to +4.8V power supply, allowing direct connection to a 3-cell battery stack. The signal path incorporates an adjustable-gain LNA and an image-reject downconverter with 35dB image suppression. These features yield excellent combined downconverter noise figure (4dB) and high linearity with an input third-order intercept point (IP3) of up to +2dBm. All devices include an on-chip local oscillator (LO), requiring only an external varactor-tuned LC tank for operation. The integrated divide-by-64/65 dual-modulus prescaler can also be set to a direct mode, in which it acts as an LO buffer amplifier. Three separate power-down inputs can be used for system power management, including a 0.5µA shutdown mode. These parts are compatible with commonly used modulation schemes such as FSK, BPSK, and QPSK, as well as frequency hopping and direct sequence spread-spectrum systems. All devices come in a 28-pin SSOP package. Evaluation kits are available for the MAX2420/ MAX2421/MAX2422. The MAX2420/MAX2421/MAX2422 are transceivers whose receive sections and pinout are identical to the MAX2440/MAX2441/MAX2442. For complete transceiver devices, refer to the MAX2420/ MAX2421/MAX2422/MAX2460/MAX2463 and MAX2424/ MAX2426 data sheets.
产品关键特性
| 应用与使用范围
|
订购型号 | 产品状态 | 封装形式 | 工作温度 | RoHS/无铅 |
MAX2440EAI | 停止供货 | SSOP;28引脚;81.6mm²封装信息 | -40°C至+85°C | RoHS/无铅:否材料分析 |
MAX2440EAI+ | 停止供货 | SSOP;28引脚;81.6mm²封装信息 | -40°C至+85°C | RoHS/无铅:无铅材料分析 |
MAX2440EAI+T | 停止供货 | SSOP;28引脚;81.6mm²封装信息 | -40°C至+85°C | RoHS/无铅:无铅材料分析 |
MAX2440EAI-T | 停止供货 | SSOP;28引脚封装信息 | -40°C至+85°C | 参考数据资料 |
MAX2441EAI | 停止供货 | SSOP;28引脚;81.6mm²封装信息 | -40°C至+85°C | RoHS/无铅:否材料分析 |
MAX2441EAI+ | 停止供货 | SSOP;28引脚;81.6mm²封装信息 | -40°C至+85°C | RoHS/无铅:无铅材料分析 |
MAX2441EAI+T | 停止供货 | SSOP;28引脚封装信息 | -40°C至+85°C | 参考数据资料 |
MAX2441EAI-T | 停止供货 | SSOP;28引脚封装信息 | -40°C至+85°C | 参考数据资料 |
MAX2442EAI | 停止供货 | SSOP;28引脚;81.6mm²封装信息 | -40°C至+85°C | RoHS/无铅:否材料分析 |
MAX2442EAI+ | 停止供货 | SSOP;28引脚;81.6mm²封装信息 | -40°C至+85°C | RoHS/无铅:无铅材料分析 |
MAX2442EAI+T | 停止供货 | SSOP;28引脚封装信息 | -40°C至+85°C | 参考数据资料 |
MAX2442EAI-T | 停止供货 | SSOP;28引脚封装信息 | -40°C至+85°C | 参考数据资料 |