MAX9150EVKIT：MAX9150评估板
The MAX9150 evaluation kit (EV kit) is a fully assembled and tested circuit board that simplifies the evaluation of the MAX9150 400Mbps, 10-port low-voltage differential signaling (LVDS) repeater. The MAX9150 accepts an LVDS signal and repeats it on 10 outputs. Output levels are LVDS into a double-terminated bus (100Ω at each end of the differential bus for a total 50Ω load). The EV kit contains two independent circuits, each with a MAX9150 repeater, that can be linked using various media or tested independently. The outputs can be sampled through SMA connectors or category-5 twisted-wire pair. The two circuits on the EV kit require +3.3V power supplies to operate.
关键特性- Two Independent Repeater Circuits
- Link Testing with LVDS Signals
- Supports Testing of Various Media
- Coax Cable with SMA Connectors
- Twisted-Wire Pair
- PC Board Trace
- Independent Supplies Allow Common-Mode Testing
- Low-Voltage, Low-Power Operation
- Fully Assembled and Tested
| 应用- 上/下路复用器
- 背板与互连应用
- 蜂窝电话基站
- 时钟/数据分配
- 数字交叉连接
- 网络路由器和交换机
|
数据手册DataSheet
订购型号
| 型号 | 状况 | 推荐替代产品 | 封装 |
|---|
| MAX9150EVKIT | 生产中 | | EVKIT； |
