SC-USB-SPI2：USB-to-SPI Interface Adapter for SC2200
SC-USB-SPI2# is an adapter used for converting a
computer’s USB interface connection to the serial parallel
interface (SPI) used by the SC2200. This is not required
for operating the SC2200 evaluation kits. It is only
recommended for prototypes debug and/or programming
linearizer during manufacturing (if no other means
available such as onboard micro controller).
Only two connections are required for use with the
SC2200 and no external power supply is required. The
USB connection from the host computer is made through
a standard USB 2.0 cable – a male-to-micro-USB B
connected to female connector, J20, on SC-USB-SPI2#.
The interface connection between the board containing
the SC2200 and the SC-USB-SPI2# adapter is through J1.
This adapter can only be used to run one instance of
the SC2200 GUI at a time. Conflicts will occur when
running multiple SC2200 GUIs trying to open the same SPI
communication pipe.
Typical Operating Temperature: +25°C
| 应用- 放大器：A/AB类、Doherty
- PA平均输出功率示例：蜂窝基础设施：27dBm至40dBm
- BTS放大器、RRH、升压放大器、中继器、小蜂窝、微蜂窝、微微蜂窝、DAS、AAS和MIMO系统
- 蜂窝基础设施
- PA工艺：LDMOS、GaN、HBT、GaAs和InGaP
- 单/多载波，多标准：CDMA/EVDO、TD-SCDMA、WiMAX、WCDMA/HSDPA、LTE和TD-LTE
- 较宽范围的PA和输出功率
|
数据手册DataSheet
订购型号
| 型号 | 状况 | 推荐替代产品 | 封装 |
|---|
| SC-USB-SPI2# | 生产中 | | EVKIT； |
