ADM00519 MCP16331 Buck Converter Evaluation Board

The MCP16331 Buck Converter Evaluation Board is used to evaluate and demonstrate Microchip Technology’s MCP16331 product in the SOT-23 package. This board demonstrates the MCP16331 in a buck-converter application with two selectable output voltages. Test points are provided for the input and output, allowing the board to be connected directly to a system. Additional test points are provided to access the EN pin, in order to modify the state of the converter and also access the SW pin, in order to see the switching waveform. The MCP16331 High-Voltage Buck Converter Evaluation Board was developed to help engineers reduce product design cycle time.

• Input voltage range, VIN: 6V to 50V
• Converter can be turned on/off by using a jumper on the EN/GND connector
• Fixed output voltage: 3.3V or 5.0V (selectable through the use of a switch)
• Typical output current: 500 mA
• PWM Switching Frequency = 500 kHz
• Internal compensation
• Internal soft-start
• Over-temperature protection (if the die temperature exceeds 150°C, 25°C hysteresis)
文档资料与软件下载
DocumentsLast UpdatedSize
Analog & Interface Product Selector Guide3/21/2016 12:51:34 PM4MB
MCP16331 Data Sheet11/9/2014 7:12:24 AM1MB
MCP16331 Buck Converter Evaluation Board (ADM00519) BOM6/24/2014 2:17:35 PM17KB
MCP16331 Buck Converter Evaluation Board (ADM00519) Gerbers6/24/2014 2:02:41 PM496KB
MCP16331 Data Sheet MCP16331
Analog & Interface Product Selector Guide ENC624J600
MCP16331 Data Sheet ADM00519
MCP16331 Buck Converter Evaluation Board (ADM00519) BOM ADM00519
MCP16331 Buck Converter Evaluation Board (ADM00519) Gerbers ADM00519
ADM00519