LAN83C185 _ BDTIC 中国领先电子元器件代理商

LAN83C185

Please consider this device

The Microchip LAN83C185 is a low-power, highly integrated analog interface IC for high-performance embedded Ethernet applications. The LAN83C185 requires only a single +3.3V supply.

The LAN83C185 consists of an encoder/decoder, scrambler/descrambler, transmitter with wave-shaping and output driver, twisted-pair receiver with on-chip adaptive equalizer and baseline wander (BLW) correction, clock and data recovery, and Media Independent Interface (MII).

The LAN83C185 is fully compliant with IEEE 802.3/802.3u standards and supports both 802.3u-compliant and vendor-specific register functions. It contains a full-duplex 10BASE-T/100BASE-TX transceiver and supports 10 Mbps (10BASE-T) operation on Category 3 and Category 5 unshielded twisted-pair cable, and 100 Mbps (100BASE-TX) operation on Category 5 unshielded twisted-pair cable.

产品特性

Single Chip Ethernet PHY
Fully Compliant with IEEE 802.3/802.3u Standards
10BASE-T and 100BASE-TX Support
Supports Auto-Negotiation and Parallel Detection
Automatic Polarity Correction
Integrated DSP with Adaptive Equalizer
Baseline Wander (BLW) Correction
Media Independent Interface (MII)
802.3u Compliant Register Functions
Vendor Specific Register Functions
Comprehensive Power Management Features
General Power-down Mode
Energy Detect Power-down Mode
Low profile 64-pin TQFP RoHS compliant package
Single +3.3V Supply with 5V Tolerant I/O
0.18 Micron Technology
Low Power Consumption
Operating Temperature 0° C to 70° C
Internal +1.8V Regulator
LAN on Motherboard
10/100 PCMCIA/CardBus Applications
Embedded Telecom Applications
Video Record/Playback Systems
Cable Modems and Set-Top Boxes
Digital Televisions
Wireless Access Points

技术参数

Parameter Name Value	Value
Description High Performance Single Chip Low Power 10/100 Mbps Ethernet Physical Layer Transceiver	High Performance Single Chip Low Power 10/100 Mbps Ethernet Physical Layer Transceiver
Ethernet Bandwidth 10Base-T/ 100Base-TX	10Base-T/ 100Base-TX
Op. Voltage (V) 3.3	3.3
LEDs 4	4
# of Ethernet Ports 1	1
Interface MII	MII
Temp. Range Max. (°C) 70	70
Interface1 MII	MII
Supply Voltage (V) 3.3	3.3
Vdd I/O (V) 3.3	3.3

文档资料

LAN83C185 High Performance Single Chip Low Power 10/100 Physical Layer Transcei	Data Sheets	06/12/2008	788KB
AN10.13 - Migrating from the LAN83C180 10/100 PHY to the LAN83C185 10/100 PHY	AppNote	06/07/2008	210KB
AN13.18 - Scalable 10/100 Ethernet Reference Design to Support Migration from LAN83C185 Non Auto-MDIX PHY to LAN8187 HP Auto-MDIX PHY	AppNote	06/18/2008	176KB
AN13.9 - Migrating from the LAN83C183 10/100 PHY to the LAN83C185 10/100 PHY	AppNote	09/28/2005	177KB
AN17.18 - SMSC Design Guide for Power over Ethernet Applications	AppNote	09/20/2009	445KB
AN2157 - Transient Protection in Power Over Ethernet Applications	AppNote	05/24/2016	229KB
AN8.13 - Suggested Magnetics	AppNote	06/28/2011	240KB
LAN83C185 IBIS Model	IBIS	11/29/2007	184KB
LAN83C185 64-pin TQFP Package Component Placement Checklist	Design Checklist	08/08/2007	50KB
LAN83C185 64-pin TQFP Package Routing Checklist	Design Checklist	08/08/2007	51KB
LAN83C185 Component Placement Checklist	Design Checklist	08/24/2013	1KB
LAN83C185 Routing Checklist	Design Checklist	08/24/2013	1KB
LAN83C185 Schematic Checklist	Design Checklist	08/24/2013	1KB
LAN83C185 TQFP Rev B Schematic Checklist	Design Checklist	09/07/2007	84KB
LAN83C185 High Performance Single Chip Low Power 10/100 Physical Layer Transcei	Product Briefs	06/12/2008	83KB
LAN83C185 Reference Design Bill of Materials	Schematics	01/02/2007	21KB
LAN83C185 Reference Design Schematic	Schematics	01/02/2007	106KB