MIC2165

The Micrel MIC2165 is a synchronous adaptive on-time buck controller targeting high performance, cost sensitive applications such as set-top boxes, gateways, routers, computing peripherals, and telecom/networking equipment.

The MIC2165 operates over a supply range of 4.5V to 28V. It has an internal linear regulator which provides a regulated 5V supply to power the internal control circuitry. MIC2165 operates at a constant 600kHz switching frequency and can be used to drive up to 25A of output current. The output voltage is adjustable from 0.8V to 5.5V.

A unique Hyper Speed Control™ architecture enables ultra-fast transient response while reducing the output capacitance and also makes High VIN/Low VOUT operation possible.

A UVLO feature is provided to ensure proper operation under power-sag conditions to prevent the external power MOSFET from over heating. Also, a soft start feature is provided to reduce the inrush current. Short current sensing on the bottom MOSFET with hiccup mode operation ensures protection in case of an output short circuit. Further, the MIC2165 includes an EN pin to shut down the converter and a Power Good (PGOOD) pin to allow simple sequencing.

The MIC2165 is available in a 10-pin MSOP ePad package with a junction operating temperature range from -40°C to +125°C.

产品特性
  • Hyper Speed Control™ architecture enables
  • High VIN/Low VOUT operation (VIN=28V and VOUT=0.8V)
  • Smallest output capacitance
  • HyperLight Load® Efficiency
  • Built-in 5V regulator for single-supply operation
  • Any Capacitor™ stable
  • Zero ESR to high ESR
  • Power-Good output
  • Input voltage range: 4.5V to 28V
  • 5 µA typical shutdown current
  • 25A output current drive capability
  • Adjustable output from 0.8Vto 5.5V with ±1% FB Accuracy
  • 600kHz switching frequency
  • Internal 5ms digital soft start
  • Thermal shutdown and "hiccup" current limit protection
  • No external current-sense resistor required
  • Safe start-up into pre-biased loads
  • 10-pin MSOP ePad package
  • -40°C to +125°C junction temperature range
技术参数
Parameter Name Value Value
Supported Topologies Sync. Buck Sync. Buck
Supported Outputs 1 1
Minimum Input Voltage (V) 4.5 4.5
Maximum Input Voltage (V) 28 28
Minimum Output Voltage (V) 0.8 0.8
Maximum Output Voltage (V) 5.5 5.5
PFM, Discontinuous, Hyperlight load, or Skip Mode True True
Typical Tolerance (%) ±1 ±1
Duty Cycle Max (%) 0.82 0.82
Operating Frequency (Hz) 600K 600K
Power Good Signal True True
Soft Start True True
Internal Voltage Bias True True
Enable Pin True True
Current Limit / Short Circuit Protection True True
Input UVLO Typ (V) 4.2 4.2
Operating Supply Current (mA) 0.45 0.45
Iq Off (µA) 5 5
Package 10/MSOP 10/MSOP
文档资料
MIC2165 - Adaptive On-Time DC-DC Controller Featuring HyperLight Load®Data Sheets11/05/2015701KB
订购型号
Part NumberLeadsPackage TypeTemp RangePacking1+26+100+1000+5000+
MIC2165YMME10MSOP-40C to +125CTUBE**********
MIC2165YMME-TR10MSOP-40C to +125CT/R**********
器件无铅环保信息
PartNumberDeviceWeightShippingWeightLeadCountPackageTypePackageWidthSolderCompositionJEDECIndicatorRoHSChinaEFUP
MIC2165YMME0.0248000.13560010MSOP3x3x1.0mmMatte Tine3
MIC2165YMME-TR0.0248000.20614810MSOP3x3x1.0mmMatte Tine3
MIC2165 - Adaptive On-Time DC-DC Controller Featuring HyperLight Load® MIC2165