PN5120A0HN: Full NFC Forum-compliant frontend
PN512 is the most broadly adopted NFC frontend - powering more than 10 billion NFC transactions per year.
It is a highly integrated NFC frontend for contactless communication at 13.56 MHz. This NFC frontend utilizes an outstanding modulation and demodulation concept completely integrated for different kinds of contactless communication methods and protocols at 13.56 MHz.
The PN512 NFC frontend supports 4 different operating modes:
Enabled in Reader/Writer mode for ISO/IEC 14443A/MIFARE®, the PN512’s internal transmitter part is able to drive a reader/writer antenna designed to communicate with ISO/IEC 14443A/ MIFARE cards and transponders without additional active circuitry. The receiver part provides a robust and efficient implementation of a demodulation and decoding circuitry for signals from ISO/IEC 14443A/MIFARE compatible cards and transponders. The digital part handles the complete ISO/IEC 14443A framing and error detection (Parity and CRC).
Enabled in Reader/Writer mode for FeliCa, the PN512 NFC frontend supports the FeliCa communication scheme. The receiver part provides a robust and efficient implementation of the demodulation and decoding circuitry for FeliCa coded signals. The digital part handles the FeliCa framing and error detection like CRC. The PN512 supports contactless communication using FeliCa Higher transfer speeds up to 424 kbit/s in both directions.
The PN512 supports all layers of the ISO/IEC 14443B reader/writer communication scheme, given correct implementation of additional components, like oscillator, power supply, coil etc. and provided that standardized protocols, e.g. like ISO/IEC 14443-4 and/or ISO/IEC 14443B anticollision are correctly implemented.
In Card Operation mode, the PN512 NFC frontend is able to answer to a reader/writer command either according to the FeliCa or ISO/IEC 14443A/MIFARE card interface scheme. The PN512 generates the digital load modulated signals and in addition with an external circuit the answer can be sent back to the reader/writer. A complete card functionality is only possible in combination with a secure IC using the S²C interface.
Additionally, the PN512 NFC frontend offers the possibility to communicate directly to an NFCIP-1 device in the NFCIP-1 mode. The NFCIP-1 mode offers different communication mode and transfer speeds up to 424 kbit/s according to the Ecma 340 and ISO/IEC 18092 NFCIP-1 Standard. The digital part handles the complete NFCIP-1 framing and error detection.
Various host controller interfaces are implemented:
The PN512 is available in three versions:
MFRC522 Block diagram
Outline 3d SOT618-1
数据手册 (1)
| 名称/描述 | Modified Date |
|---|---|
| Full NFC Forum-compliant frontend (REV 5.2) PDF (1.2 MB) PN512 [English] | 21 Jun 2016 |
应用说明 (15)
用户指南 (3)
| 名称/描述 | Modified Date |
|---|---|
| POS Reference Design - Firmware description (REV 1.4) PDF (571.0 kB) UM10493 [English] | 14 Apr 2014 |
| NXP® Reader Library User Manual based on CLRC663 and PN512 Blueboard Reader projects (REV 1.2) PDF (467.0 kB) UM10663 [English] | 24 Oct 2013 |
| NXP® Reader Library Peer to Peer User Manual based on CLRC663 and PN512 Blueboard Reader projects (REV 1.1) PDF (974.0 kB) UM10721 [English] | 24 Jul 2013 |
手册 (1)
| 名称/描述 | Modified Date |
|---|---|
| NXP® Near Field Communication (NFC) transceiver PN512 for low-cost electronic devices (REV 1.6) PDF (545.0 kB) 939775017217 [English] | 08 May 2012 |
选型工具指南 (1)
| 名称/描述 | Modified Date |
|---|---|
| Application guide; Portable devices and mobile handsets (REV 2.0) PDF (15.4 MB) 75017090 [English] | 13 Mar 2012 |
封装信息 (1)
| 名称/描述 | Modified Date |
|---|---|
| plastic thermal enhanced very thin quad flat package; no leads; 40 terminals; body 6 x 6 x 0.85 mm (REV 1.1) PDF (231.0 kB) SOT618-1 [English] | 08 Jun 2016 |
电路图
- Schematics and BOM for PNEV512B (REV 1.0) ZIP SW302410 8/6/2014
软件
- RFIDDiscover Lite V4.1 (REV 4.1) ZIP SW214441 11/25/2015
- Schematics and BOM for EXPLORE-NFC (REV 1.0) ZIP OT344310_1 9/9/2015
- Installer for Win7: Windows Hardware Abstraction Layer (HAL) Software Development Kit (SDK) for NXP NFC IC PN531 USB/Serial, PN532 (serial), PN51x (serial): SDK_NFC_HAL_v2.2 including Source code ("C") HAL (Install shield) including MIFARE 1K and P2 (REV 2.2) rar NFCHAL_SDKV22_SETUP_227122 2/1/2012
- Installer fro WIN_XP: Windows Hardware Abstraction Layer (HAL) Software Development Kit (SDK) for NXP NFC IC PN531 USB/Serial, PN532 (serial), PN51x (serial): SDK_NFC_HAL_v2.2 including Source code ("C") HAL (Install shield) including MIFARE 1K and (REV 2.2) ZIP 123622 8/20/2010
- BFL 14443B CAddOn (REV 1.0) ZIP 104210 7/23/2010
程序库
- Eagle parts library (REV 1.1) ZIP NXP_RFID_213911 1/3/2012
- PN51x, Basic function library (v.4.2) and JoinerPC Serial installation (REV 4.2) ZIP 109141 6/15/2010
订购信息
| 型号 | 状态 | Recommended application | Recommended application | NFC Functionality | Host interfaces | ISO/IEC 180003M3 | Host interface supply voltage [typ] (V) | RF functionality | RF driver current [max] (mA) | ISO/IEC 15693 | RF protocols | Tamb [min] (°C) (Cel) | RF driver supply [min] (V) | RF driver supply voltage [typ] (V) | RF driver current [max] (mA) | RF driver current current [max] (mA) | RF driver supply [max] (V) | Supported standards | Tamb [min] (°C) | Read distance [type] (mm) | SPI | Tamb (Cel) | I2C | No of pins | UART | Package name | Package version |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PN5120A0HN/C2 | Active | Consumer | Consumer | Full NFC | UART; I2C; SPI | N | 1.6 - 3.6 | Reader Mode, P2P, Cardmode | 100.0 | N | ISO/IEC 14443A; ISO/IEC 14443B; FeliCa; ISO/IEC 18092; MIFARE classic | -30 | 2.5 | 2.5 - 3.6 | 100.0 | 3.6 | ISO/IEC 14443A; ISO/IEC 14443B; ISO/IEC 18092; NFC Forum compliance | -30 | 70 | Y | -25~85 | Y | 40 | Y | HVQFN40 | ||
| PN5120A0HN/C1 | End of Life | Consumer | Consumer | Full NFC | UART; I2C; SPI | N | 1.6 - 3.6 | Reader Mode, P2P, Cardmode | 100.0 | N | ISO/IEC 14443A; ISO/IEC 14443B; FeliCa; ISO/IEC 18092; MIFARE classic | -30 | 2.5 | 2.5 - 3.6 | 100.0 | 3.6 | ISO/IEC 14443A; ISO/IEC 14443B; ISO/IEC 18092; NFC Forum compliance | -30 | 70 | Y | -25~85 | Y | 40 | Y | HVQFN40 |
封装环保信息
| 产品编号 | 封装说明 | Outline Version | 回流/波峰焊接 | 包装 | 产品状态 | 部件编号订购码 (12NC) | Marking | 化学成分 | RoHS / 无铅 / RHF | 无铅转换日期 | MSL | MSL LF |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PN5120A0HN/C1 | | SOT618-1 | Reel 13" Q1/T1 in Drypack | Discontinued | PN5120A0HN/C1,518 (9352 800 79518) | Standard Marking | PN5120A0HN/C1 |    | Always Pb-free | 3 | 3 | |
| Tray, Bakeable, Multiple in Drypack | Discontinued | PN5120A0HN/C1,557 (9352 800 79557) | Standard Marking | PN5120A0HN/C1 | | Always Pb-free | 3 | 3 | ||||
| Tray, Bakeable, Single in Drypack | Discontinued | PN5120A0HN/C1,551 (9352 800 79551) | Standard Marking | PN5120A0HN/C1 | | Always Pb-free | 3 | 3 | ||||
| PN5120A0HN/C2 | | SOT618-1 | Reel 13" Q1/T1 in Drypack | Active | PN5120A0HN/C2,518 (9352 921 14518) | Standard Marking | PN5120A0HN/C2 | | Always Pb-free | 3 | 3 | |
| Tray, Bakeable, Multiple in Drypack | Active | PN5120A0HN/C2,557 (9352 921 14557) | Standard Marking | PN5120A0HN/C2 | | Always Pb-free | 3 | 3 | ||||
| Tray, Bakeable, Single in Drypack | Active | PN5120A0HN/C2,551 (9352 921 14551) | Standard Marking | PN5120A0HN/C2 | | Always Pb-free | 3 | 3 |
- Quick Start Up Guide PNEV512B Board LPC1227FBD64
- Quick Start-up Guide for EXPLORE-NFC working with Raspberry Pi pn512
- NFC Reader Library for Linux Installation Guidelines pn5180
- How to build a NFC Application on Android pn7120
- Measurement and tuning of a NFC and Reader IC antenna with a MiniVNA pn5321a3hn
- Guide about how to port the Passive Target example from the NFC Reader Library to another MCU pn512
- Using the RS232 serial evaluation boards on a USB port pn5321a3hn
- How to Scale Down the NXP® Reader Library slrc61002hn
- Fast Verification of PN512 and amplifier pn512
- AN1425 RF Amplifier for NFC Reader IC's; AN166510 Amplifier antenna matching calculation (Excel) pn5331b3hn
- How to use PN51x demo board PN512
- AN1445 Antenna design guide for MFRC52x, PN51x, PN53x; AN1444 RF Design Guide including Excel Calculation sheet pn5331b3hn
- AN108711 Tips and Tricks for PN51x Integration pn512
- NFC-FRI SDK (NFC Forum Reference Implementation) pn5331b3hn
- AN108511; PN51x Design -In Kit Quick Start Guide pn512
- POS Reference Design - Firmware description LPC1768FET100
- NXP® Reader Library User Manual based on CLRC663 and PN512 Blueboard Reader projects slrc61002hn
- NXP® Reader Library Peer to Peer User Manual based on CLRC663 and PN512 Blueboard Reader projects slrc61002hn
- NXP® Near Field Communication (NFC) transceiver PN512 for low-cost electronic devices pn512
- Application guide; Portable devices and mobile handsets pesd24vs1ul
- Schematics and BOM for PNEV512B PN512AA0HN1
- RFIDDiscover Lite V4.1 PN512AA0HN1
- Schematics and BOM for EXPLORE-NFC PN512AA0HN1
- Installer for Win7: Windows Hardware Abstraction Layer (HAL) Software Development Kit (SDK) for NXP NFC IC PN531 USB/Serial, PN5 PN5331B3HN
- Installer fro WIN_XP: Windows Hardware Abstraction Layer (HAL) Software Development Kit (SDK) for NXP NFC IC PN531 USB/Serial, P PN5331B3HN
- BFL 14443B CAddOn PN512AA0HN1
- Eagle parts library PN5331B3HN
- PN51x, Basic function library (v.4.2) and JoinerPC Serial installation PN512AA0HN1
- plastic thermal enhanced very thin quad flat package; no leads; 40 terminals; body 6 x 6 x 0.85 mm TDA18273HN
- TDA18273HN
