• 简体中文
• English

SL2S2602FUD: ICODE® SLIX2

The ICODE® SLIX2 IC is the newest member of NXP’s SLIX product family. The chip is fully backwards compatible to SLIX and offers an increased user memory size, along with new outstanding features and performance:

Whenever connected to a very simple and easy-to-produce type of antenna (as a result of the 13.56 MHz carrier frequency) made out of a few windings printed, winded, etched or punched coil, the ICODE SLIX2 IC can be operated without line of sight up to a distance of 1.5 m (gate width). No battery is needed. When the smart label is positioned in the field of an interrogator antenna, the high speed RF communication interface enables data to be transmitted up to 53 kbit/s.

An intelligent anticollision function enables several tags to operate in the field simultaneously. The anticollision algorithm selects each tag individually and ensures that the execution of a transaction with a selected tag is performed correctly without data corruption resulting from other tags in the field.

Unique IDentifier (UID):

The UID cannot be altered and guarantees the uniqueness of each label.

Originality signature:

32 byte ECC based originality signature.

Password protected memory management (Read/Write access):

The user memory can be segmented into two pages and the access rights for read/write access can be defined for each of them. This ensures that only authorized users get read/write access to the protected parts of the user memory (anti counterfeiting). READMULTIPLE BLOCK and (FAST) INVENTORY READ are compatible to ICODE SLI and ICODE SLIX.

Password protected Label Destroy:

The 32-bit Destroy password enables an addressed label to be destroyed with the DESTROY SLIX2 command. That status is irreversible and the label will never respond to any command again.

Password protected Privacy Mode:

The 32-bit Privacy password enables a label to be set to the Privacy mode with the ENABLE PRIVACY command. In this mode the label will not respond to any command except the command GET RANDOM NUMBER, until it next receives the correct Privacy password. This mode is especially designed to meet the increasing demand to take care of the customers privacy.

Password protected EAS and AFI functionality:

The 32-bit EAS/AFI password enables the addressed label to be set in a mode where the EAS status, the EAS ID and/or the AFI value can only be changed if the correct EAS/AFI password needs to be transmitted before with the SET PASSWORD command.

16 bit counter:

The last block of the user memory provides a special feature - the 16 bit counter. The counter can be increased by one with a WRITE command (optionally password protected by the read password). The counter can be reset to an initial value with the write password.

• Contactless transmission of data and supply energy (no battery needed)
• Operating distance: up to 1.5 m (depending on antenna geometry)
• Operating frequency: 13.56 MHz (ISM, world-wide licence freely available)
• Fast data transfer: up to 53 kbit/s
• High data integrity: 16-bit CRC, framing
• True anticollision
• Electronic Article Surveillance (EAS)
• Application Family Identifier (AFI) supported
• Data Storage Format Identifier (DSFID)
• ENABLE PRIVACY command with 32-bit Privacy password
• DESTROY SLIX2 command with 32-bit Destroy password
• Additional fast anticollision read
• Persistent quiet mode to enable faster inventory speed
• Write distance equal to read distance

• 2560 bits user memory, organized in 80 blocks of 4 bytes each (last block reserved for counter feature)
• 50 years data retention
• Write endurance of 100000 cycles

• Unique identifier for each device (8 byte)
• 32 byte originality signature
• Lock mechanism for each user memory block (write protection)
• Lock mechanism for DSFID, AFI, EAS
• Password (32-bit) protected memory management for Read access
• Password (32-bit) protected memory management for Write access
• Password (32-bit) protected Label Destroy
• Password (32-bit) protected Privacy Mode
• Password (32-bit) protected EAS and AFI functionality
• 16 bit counter (optionally password protected with the read and write password)

数据手册 (1)

应用说明 (3)

手册 (1)

订购信息

封装环保信息

产品编号	封装说明	Outline Version	回流/波峰焊接	包装	产品状态	部件编号订购码 (12NC)	Marking	化学成分	RoHS / 无铅 / RHF	无铅转换日期	MSL	MSL LF
SL2S2602FUD					Withdrawn	SL2S2602FUDZ (9353 031 11003)	Standard Marking			Always Pb-free	NA	NA
SL2S2602FUD/BG					Active	SL2S2602FUD/BGZ (9353 073 26003)	Standard Marking	SL2S2602FUD/BG		Always Pb-free	NA	NA