TEA1905T: USB-PD type C controller for SMPS

The TEA1905 is a USB Power Delivery (USB-PD) type-C and other proprietary protocol (Quick Charge) controller with a high integration level and near fully digital bare minimum of external components. The TEA1905 USB-PD controller drives an NMOS load switch. It achieves a very high power density Switching Mode Power Supply (SMPS) with an ultra-high efficiency over the entire load range. When applied in combination with the NXP Semiconductors primary controller, TEA1936T, it meets the CoC Tier-2, EuP lot 6, and DOE v6 energy efficiency requirement specifications.

In addition to the power control and required protections, the TEA1905 incorporates the full feature set of the type C USB-PD protocol that is required for an AC-to-DC SMPS adapter.

The SW pin is used to drive an external load switch (NMOS), which enables/disables the power over Vbus. When the output voltage is reduced or the type-C cable is detached, the DISCH pin ensures that the output voltage discharges in a controlled way to the voltage level required by the USB-PD protocol.

The TEA1905 incorporates all required protections, like OverTemperature Protection (OTP), adaptive OverVoltage Protection (OVP), Short Circuit Protection (SCP), and UnderVoltage LockOut (UVLO) protection.

  • High integration level (only requires an external line switch and SR diode or controller)
  • NMOS load switch without external winding
  • Fault handling at secondary side without second optocoupler
  • Low-cost SO14 package (suitable for both reflow soldering and wave soldering) or leadless HVSON16 package for smaller size (reflow only)
  • Low-cost Bill Of Materials (BOM; ≈15 external components)
  • Very low no-load power (< 25 mW for the complete system solution)
  • High power density
  • Ultra-high efficiency

sot108-1_3d
封装信息 (1)
名称/描述Modified Date
plastic small outline package; 14 leads; body width 3.9 mm (REV 1.0) PDF (166.0 kB) SOT108-1 [English]08 Feb 2016
包装 (1)
名称/描述Modified Date
SO14; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or J Ordering... (REV 4.0) PDF (207.0 kB) SOT108-1_118 [English]08 Apr 2013
支持信息 (2)
名称/描述Modified Date
Footprint for reflow soldering (REV 1.0) PDF (9.0 kB) SO-SOJ-REFLOW [English]08 Oct 2009
Footprint for wave soldering (REV 1.0) PDF (8.0 kB) SO-SOJ-WAVE [English]08 Oct 2009
订购信息
型号状态Package namePackage versionTopologyfosc (kHz)fosc peak (kHz)fosc high (kHz)fosc medium (kHz)fburst (kHz)VCC [max] (V)Softstart特性
TEA1905TIntroduction PendingSO14SOT108-1
TEA1905T/1Introduction PendingSO14
封装环保信息
产品编号封装说明Outline Version回流/波峰焊接包装产品状态部件编号订购码 (12NC)Marking化学成分RoHS / 无铅 / RHF
TEA1905T/1SOT108-1SO-SOJ-REFLOW SO-SOJ-WAVE
SO-SOJ-REFLOW SO-SOJ-WAVE
Reel 13" Q1/T1DevelopmentTEA1905T/1J (9353 084 76118)Standard Marking
plastic small outline package; 14 leads; body width 3.9 mm 74LV164_Q100
Footprint for reflow soldering NPIC6C596A_Q100
Footprint for wave soldering NPIC6C596A_Q100
SO14; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or J Ordering... 74LV164_Q100
UBA2213