UJA1136HW: Buck/boost HS-CAN/dual LIN system basis chip _ BDTIC 中国领先电子元器件代理商

UJA1136HW: Buck/boost HS-CAN/dual LIN system basis chip

The UJA113x System Basis Chip (SBC) contains a fully integrated buck and boost converter along with a number of features commonly found in the latest generation of automotive Electronic Control Units (ECUs). It interfaces directly with CAN and LIN bus lines, supplies the microcontroller, handles input and output signals and supports fail-safe features including a watchdog and advanced ‘limp home’ functionality configurable via non-volatile memory.

To satisfy the demand for SBCs that operate at low battery supply voltages and feature low power dissipation, a switched mode power supply (SMPS) with automatic down (Buck mode) or up conversion (Boost mode) has been integrated into the UJA113x. In Boost mode, the SMPS of the UJA1131 and UJA1132 variants can continue supplying a microcontroller during dips in the battery voltage, ensuring uninterrupted operation. The boost stage of the UJA1135 and the UJA1136 has limited output current capability, and is suitable for supplying the memory in a microcontroller to prevent information being lost. The SMPS requires only a single external coil and some capacitors but no separate semiconductors.

The UJA113x implements the classic CAN physical layer as defined in the current ISO11898 standard (-2:2003, -5:2007, -6:2013). Pending the release of the upcoming version of ISO11898-2:201x including CAN FD, additional timing parameters defining loop delay symmetry are included. This implementation enables reliable communication in the CAN FD fast phase at data rates up to 2 Mbit/s.

The UJA113xFD/x variants support ISO 11898-6:2013 and ISO 11898-2:201x compliant CAN partial networking with a selective wake-up function incorporating CAN FD-passive. CAN FD-passive is a feature that allows CAN FD bus traffic to be ignored in Sleep/Standby mode. CAN FD-passive partial networking is the perfect fit for networks that support both CAN FD and classic CAN communications. It allows normal CAN controllers that do not need to communicate CAN FD messages to remain in partial networking Sleep/Standby mode during CAN FD communication without generating bus errors.

A number of configuration settings are stored in non-volatile memory. This makes it possible to adapt the power-on and limp home behavior of the UJA113x to meet the specific requirements of an application.

数据手册 (1)

名称/描述	Modified Date
Buck/boost HS-CAN/dual LIN system basis chip (REV 2.2) PDF (1.1 MB) UJA113X_SER [English]	02 Sep 2016

订购信息

型号	状态	Product category	类别	Supported standards	Package name	Low power modes	Supply voltage [min] (V)	Supply voltage [max] (V)	Data rate [min] (kb/s)	Data rate [max] (kb/s)	CAN channels	LIN channels	Voltage on bus pins [min] (V)	Voltage on bus pins [max] (V)	V_ESD IEC61000-4-2 (kV)	FlexRay Channels	V_ESD HBM on bus pins (+/- kV)	VIO option available	应用	Recommended Version	T_vj [max] (°C)	R_th(j-a) (K/W)	SPLIT pin	Under-voltage detection	TX Dominant Time out	Over-temperature detection	INH / Wake Pin	Min High Input Levels (V)
UJA1136HW/5V0	Active	SBC; High-Speed CAN; CAN FD; LIN Transceiver		ISO-11898-2; ISO-11898-5; ISO-11898-6; SAE J2602; LIN 2.1; LIN 2.0; compatible with LIN 1.3		Standby Mode; Sleep Mode	2	40	15	2000	1	2	-58	58	6		6	No	Yes	500mA
UJA1136HW/3V3	Active	SBC; High-Speed CAN; CAN FD; LIN Transceiver		ISO-11898-2; ISO-11898-5; ISO-11898-6; SAE J2602; LIN 2.1; LIN 2.0; compatible with LIN 1.3		Standby Mode; Sleep Mode	2	40	15	2000	1	2	-58	58	6		6	No	Yes	500mA

封装环保信息

产品编号	封装说明	Outline Version	回流/波峰焊接	包装	产品状态	部件编号订购码 (12NC)	Marking	化学成分	RoHS / 无铅 / RHF	无铅转换日期	MSL	MSL LF
UJA1136HW/3V3				Reel 13" Q1/T1 in Drypack	Active	UJA1136HW/3V3Y (9352 962 38518)	Standard Marking	UJA1136HW/3V3		Always Pb-free	3	3
UJA1136HW/5V0				Reel 13" Q1/T1 in Drypack	Active	UJA1136HW/5V0Y (9352 962 36518)	Standard Marking	UJA1136HW/5V0		Always Pb-free	3	3

Buck/boost HS-CAN/dual LIN system basis chip UJA1136HW