MSC8152: High-Performance Dual-Core DSP
The MSC8152 is the industry's highest performance, dual-core DSP based on NXP®.s SC3850 StarCore® technology with added performance from a multi-accelerator platform engine (MAPLE-B) for fast Fourier transforms (FFT) and inverse fast Fourier transforms (iFFT), discrete Fourier transforms (DFT) and inverse discrete Fourier transforms (iDFT), Turbo and Viterbi decoding. The MAPLE-B accelerator is designed for the advanced processing requirements and capabilities of today’s high-performance medical, aerospace and defense and advanced test and measurement markets. It delivers industry-leading performance and power savings, leveraging 45 nm process technology in a highly integrated system-on-chip (SoC) to provide performance equivalent to a 2 GHz single-core device. The MSC8152 helps equipment manufacturers create end products and services that integrate more functionality in a smaller hardware footprint.
MSC8152 Digital Signal Processor Block Diagram
MSC8152 Digital Signal Processor Product Image
SmartDSP OS Enablement Tools (For MSC815x and Derivatives) - Technical Overview
特性
- Two StarCore® DSP SC3850 core subsystems each with:
- SC3850 DSP core at up to 1 GHz
- 512 KB unified L2 cache/M2 memory
- 32 KB I-cache, 32 KB D-cache
- SC3850 DSP core at up to 1 GHz
- 512 KB unified L2 cache/M2 memory
- 32 KB I-cache, 32 KB D-cache
- Fully programmable 1056 KB M3 shared memory (SRAM)
- MAPLE-B - highly flexible programmable Turbo and Viterbi decoder supports configurable decoding parameters. It can perform up to 200 Mbps of Turbo decoding (six iterations) or up to 115 Mbps of K = 9 (zero tail) Viterbi decoding
- Two DDR 2/3 64-bit SDRAM interfaces at up to 800 MHz data rate
- Chip-level arbitration and switching system (CLASS), non-blocking, fully pipelined, low latency interconnect fabric
- High-speed interconnects:
- Dual x4/x1 Serial RapidIO® at 1.25/2.5/3.125 Gbaud
- PCI Express® x4/x2/x1
- Two SGMII
- Dual x4/x1 Serial RapidIO® at 1.25/2.5/3.125 Gbaud
- PCI Express® x4/x2/x1
- Two SGMII
- Dual RISC QUICC Engine® supporting:
- RGMII gigabit Ethernet ports
- Serial peripheral interface (SPI)
- RGMII gigabit Ethernet ports
- Serial peripheral interface (SPI)
- TDM interface 1024 channels, in four 256-channel ports, 62.5 Mbps per port
- DMA engine 16 bi-directional channels
- Other peripheral interfaces:
- UART
- I²C
- 32 GPIO
- 16 timers
- Technology
- Process: 45 nm SOI
- Voltage: 1-volt core, 2.5, 1.8/1.5-volt I/O
- Package: FC-BPGA, 29 x 29 balls, 1 mm pitch, RoHS
- Process: 45 nm SOI
- Voltage: 1-volt core, 2.5, 1.8/1.5-volt I/O
- Package: FC-BPGA, 29 x 29 balls, 1 mm pitch, RoHS
- This product is included in NXP®.s product longevity program, with assured supply for a minimum of 10 years after launch
Recommended Documentation (2)
Data Sheets (1)
Application Notes (18)
Reference Manuals (2)
Fact Sheets (1)
Brochures (1)
Product Numbering Scheme (1)
订购信息
| 型号 | 状态 | 预算报价（不含税）(CNY) | 封装类型和焊端数 | Core Type | 工作频率 (Max) (MHz) | 内核：内核数量 (Spec) | 工作环境温度 (Min-Max) (°C) | 缓存 (KB) | L2缓存 (Max) (KB) | 内部RAM (KB) | 支持外部存储器 | DMA通道总数 | Ethernet Type | 其他特性 |
|---|
| MSC8152TAG1000B | Not Recommended for New Design | 1K @ CNY659.77 | FCPBGA 783 | SC3850 | 1000 | 2 | -40 to 105 | 32 | 512 | 1000 | DDR, SDRAM | 16 | 1GBaseT, SGMII | Memory Management Unit (MMU), PLL |
| MSC8152SAG1000B | Not Recommended for New Design | 1K @ CNY599.72 | FCPBGA 783 | SC3850 | 1000 | 2 | 0 to 105 | 32 | 512 | 1000 | DDR, SDRAM | 16 | 1GBaseT, SGMII | Memory Management Unit (MMU), PLL |
| MSC8152TVT1000B | No Longer Manufactured | | FCBGA 783 | SC3850 | 1000 | 2 | -40 to 105 | 32 | 512 | 1000 | SDRAM, DDR | 16 | 1GBaseT, SGMII | Memory Management Unit (MMU), PLL |
| PC8152SVT1000B | No Longer Manufactured | | FCBGA 783 | | | | | | | | | | | |
| MSC8152SVT1000B | No Longer Manufactured | | FCBGA 783 | SC3850 | 1000 | 2 | 0 to 105 | 32 | 512 | 1000 | SDRAM, DDR | 16 | 1GBaseT, SGMII | Memory Management Unit (MMU), PLL |
封装环保信息
