AMIS-41682: CAN Transceiver, Fault Tolerant , 5.0 V
The new AMIS-41682 and AMIS-41683 are interfaces between the protocol controller and the physical wires of the bus lines in a control area network (CAN). AMIS-41683 is identical to the AMIS-41682 but has a true 3.3V digital interface to the CAN controller. The device provides differential transmit capability but will switch in error conditions to a single-wire transmitter and or receiver. Initially it will be used for low speed applications, up to 125kBaud, in passenger cars.Both AMIS-41682 and AMIS-41683 are implemented in I2T100 technology enabling both high-voltage analog circuitry and digital functionality to co-exist on the same chip.These products consolidate the expertise of ON Semiconductor for in-car multiples transceivers and support together with 0REMX-002-XTP (VAN), AMIS-30660 and AMIS-30663 (CAN high speed) and AMIS-30600 (LIN) another widely used physical layer.
特性- Fully compatible with ISO11898-3 standard
- Very low electromagnetic emission (EME)
- Fully integrated receiver filters
- Permanent monitoring of transmit data input
- High electromagnetic susceptibility (EMS) in normal- and low-power modes
- In the event of bus failure, automatic switching to single-wire mode
- The device will automatically reset to differential mode if the bus failure is removed
- During failure modes there is full wake-up capability
- Un-powered nodes do not disturb bus lines
- Bus errors and thermal shutdown activation is flagged on ERRB pin
- Short circuit proof to battery and ground
- Thermal protection
- The bus lines are protected against transients in an automotive environment
- Support for low power modes
- Low current sleep and standby mode
- Power-on flag on the output
- Two-edge sensitive wake-up input signal via pin WAKEB
|
培训教材 (1)
数据表 (1)
应用注释 (9)
封装图纸 (1)
| Document Title | Document ID/Size | Revision |
|---|
| SOIC-14 | 751AP (38.0kB) | B |
产品订购型号
| 产品 | 状况 | Compliance | 封装 | MSL* | 容器 | 预算价格 (1千个数量的单价） |
|---|
| AMIS41682CANM1G | Last Shipments | AEC Qualified
PPAP Capable
Pb-free
Halide free | SOIC-14 | 751AP | 2 | Tray JEDEC | 55 | |
| AMIS41682CANM1RG | Active | AEC Qualified
PPAP Capable
Pb-free
Halide free | SOIC-14 | 751AP | 2 | Tape and Reel | 3000 | 联系BDTIC |
订购产品技术参数
| Product | Data Transmission Standard | Data Rate | Number of Drivers | Number of Receivers | VCC Min (V) | VCC Max (V) | tPLH Max (µs) | IO Max (µA) | IIH Max (mA) |
|---|
| AMIS41682CANM1RG | CAN | | 1 | 1 | 4.75 | 5.25 | 8 | 45000 | 6.3 |
