MC10EP51: 3.3 V / 5.0 V ECL D Flip-Flop with Reset and Differential Clock
The MC10/100EP51 is a differential clock D flip-flop with reset. The device is functionally equivalent to the EL51 and LVEL51 devices.The reset input is an asynchronous, level triggered signal. Data enters the master portion of the flip-flop when the clock is LOW and is transferred to the slave, and thus the outputs, upon a positive transition of the clock. The differential clock inputs of the EP51 allow the device to be used as a negative edge triggered flip-flop.The differential input employs clamp circuitry to maintain stability under open input conditions. When left open, the CLK input will be pulled down to VEE and the CLKbar input will be biased at VCC / 2.
特性- 350ps Typical Propagation Delay
- Maximum Frequency > 3 Ghz Typical
- PECL Mode Operating Range: VCC = 3.0 V to 5.5 V with VEE = 0 V
- NECL Mode Operating Range: VCC = 0 V with VEE = -3.0 V to -5.5 V
- Open Input Default State
- Safety Clamp on Inputs
- Pb-Free Packages are Available
|
封装
应用注释 (16)
数据表 (1)
仿真模型 (1)
封装图纸 (3)
产品订购型号
| 产品 | 状况 | Compliance | 封装 | MSL* | 容器 | 预算价格 (1千个数量的单价） |
|---|
| MC10EP51DG | Active | Pb-free
Halide free | SOIC-8 | 751-07 | 1 | Tube | 98 | 联系BDTIC |
| MC10EP51DR2G | Active | Pb-free
Halide free | SOIC-8 | 751-07 | 1 | Tape and Reel | 2500 | 联系BDTIC |
| MC10EP51DTG | Active | Pb-free
Halide free | TSSOP-8 | 948R-02 | 3 | Tube | 100 | 联系BDTIC |
| MC10EP51DTR2G | Active | Pb-free
Halide free | TSSOP-8 | 948R-02 | 3 | Tape and Reel | 2500 | 联系BDTIC |
| MC10EP51MNR4G | Active | Pb-free
Halide free | DFN-8 | 506AA | 1 | Tape and Reel | 1000 | 联系BDTIC |
| MC10EP51MNTAG | Active | Pb-free
Halide free | DFN-8 | 506AA | 1 | Tape and Reel | 1000 | 联系BDTIC |
订购产品技术参数
| Product | Type | Bits | Input Level | Output Level | VCC Typ (V) | tJitter Typ (ps) | tpd Typ (ns) | tsu Min (ns) | th Min (ns) | trec Typ (ns) | tR & tF Max (ps) | fToggle Typ (MHz) |
|---|
| MC10EP51DG | D-Type | 1 | CML
ECL | ECL | 3.3
5 | 0.2 | 0.375 | 0.1 | 0.1 | 0.15 | 170 | 3000 |
| MC10EP51DR2G | D-Type | 1 | CML
ECL | ECL | 3.3
5 | 0.2 | 0.375 | 0.1 | 0.1 | 0.15 | 170 | 3000 |
| MC10EP51DTG | D-Type | 1 | ECL
CML | ECL | 3.3
5 | 0.2 | 0.375 | 0.1 | 0.1 | 0.15 | 170 | 3000 |
| MC10EP51DTR2G | D-Type | 1 | ECL
CML | ECL | 5
3.3 | 0.2 | 0.375 | 0.1 | 0.1 | 0.15 | 170 | 3000 |
| MC10EP51MNR4G | D-Type | 1 | ECL
CML | ECL | 3.3
5 | 0.2 | 0.375 | 0.1 | 0.1 | 0.15 | 170 | 3000 |
| MC10EP51MNTAG | D-Type | 1 | ECL
CML | ECL | 3.3
5 | 0.2 | 0.375 | 0.1 | 0.1 | 0.15 | 170 | 3000 |
