NCP1014: High Voltage Switching Regulator for Offline SMPS

The NCP101X series integrates a fixed-frequency current-mode controller and a 700 V voltage MOSFET. Housed in a PDIP7 package, the NCP101X offers everything needed to build a rugged and low-cost power supply, including soft-start, frequency jittering, short-circuit protection, skip-cycle, a maximum peak current setpoint and a Dynamic Self-Supply (no need for an auxiliary winding).Unlike other monolithic solutions, the NCP101X is quiet by nature: during nominal load operation, the part switches at one of the available frequencies (65-100-130 kHz). When the current setpoint falls below a given value, e.g. the output power demand diminishes, the IC automatically enters the so-called skip cycle mode and provides excellent efficiency at light loads. Because this occurs at typically 1/4 of the maximum peak value, no acoustic noise takes place. As a result, standby power is reduced to the minimum without acoustic noise generation.

特性
  • Built-in 700V MOSFET with Typical RdsON of 11 or 22 Ohms
  • Large Creepage Distance between High-Voltage Pins
  • Current- Mode Fixed Frequency Operation: 65kHz - 100kHz - 130kHz
  • Skip-Cycle Operation at Low Peak Currents Only: No Acoustic Noise!
  • Dynamic Self-Supply, No Need of an Auxiliary Winding
  • Internal 1ms Soft-Start
  • Auto-Recovery Internal Output Short-Circuit Protection
  • Latched Overvoltage Protection with Auxiliary Winding Operation
  • Frequency Jittering for better EMI Signature
  • Below 100 mW Standby Power if Auxiliary Winding is Used
  • Internal Temperature Shutdown
  • Direct Optocoupler Connection
  • SPICE Models Available for Transient AC analysis
  • Pb-Free Packages are Available
应用
  • Auxiliary Power Supplies
终端产品
  • Low Power AC/DC Adapter for Chargers
封装
设计和开发工具 (1)
Document TitleDocument ID/SizeRevisionRevision Date
Flyback Current Mode Loop Compensation Design WorksheetFLYBACK DWS.XLS.ZIP (3516kB)10Dec, 2014
仿真模型 (2)
Document TitleDocument ID/SizeRevisionRevision Date
IsSpice model for NCP101XNCP101X_ISSPICE (160.0kB)0
OrCAD model for NCP101XNCP101X_ORCAD (26.0kB)0
数据表 (1)
Document TitleDocument ID/SizeRevisionRevision Date
Self-Supplied Monolithic Switcher for Low Standby-Power Offline SMPSNCP1010/D (346kB)24Oct, 2016
封装图纸 (3)
Document TitleDocument ID/SizeRevision
PDIP (8 Minus Pin 6), Gull Wing626AA (27.5kB)O
PDIP-7 (PDIP-8 LESS PIN 6)626A-01 (34.2kB)C
SOT-223 (TO-261) 4 LEAD318E-04 (68.4kB)N
应用注释 (19)
Document TitleDocument ID/SizeRevisionRevision Date
700 mA LED Power Supply Using Monolithic Controller and Off-Line Current Boosted (Tapped Inductor) Buck ConverterAND8328/D (132.0kB)0
A 6 W/12 W Universal Mains Adapter with the NCP101XAND8142/D (161.0kB)0
An Off-Line, Power Factor Corrected, Buck-Boost Converter for Low Power LED ApplicationsAND9043/D (124kB)1Mar, 2014
Designing Converters with the NCP101X FamilyAND8134/D (140.0kB)0
Evaluating the Power Capability of NCP101X MembersAND8125/D (57.0kB)0
How to Choose Switching Controller for DesignAND8205/D (78kB)2Jan, 2014
Implementing Simple Brown-Out Solution for NCP101X SeriesAND8272/D (43.0kB)0
Increasing the Efficiency of Low Power Converters with Resonant SnubbersAND8296/D (98.0kB)1
NCP101x LED Flasher with Luxeon V Star LEDAND8224/D (98.0kB)0
Non-isolated Negative Output Buck AC/DC ConverterAND8190/D (49.0kB)0
Non-isolated Positive Output Buck/Boost AC/DC ConverterAND8191/D (58.0kB)0
Nonisolated Negative Output Buck/Boost AC/DC ConvertorAND8225/D (887.0kB)1
Nonisolated Positive Output Buck AC/DC ConverterAND8226/D (1563.0kB)1
Offline Buck Converter with Tapped Inductor Improves PerformanceAND8318/D (100.0kB)1
Offline isolated power supply to drive 3 LEDsAND8136/D (95.0kB)1
Performance Improvements to the NCP1012 Evaluation BoardAND8132/D (95.0kB)0
Simple Secondary Side Vcc Source for Low Power CVCC Power SuppliesAND8395/D (124.0kB)0
Stability Analysis in Multiple Loop SystemsAND8327/D (213.0kB)0
Understanding Loop Compensation with Monolithic SwitchersAND8334/D (167.0kB)0
评估板文档 (9)
Document TitleDocument ID/SizeRevisionRevision Date
NCP1014LEDGTGEVB Bill of Materials ROHS CompliantNCP1014LEDGTGEVB_BOM_ROHS.PDF (144.0kB)2
NCP1014LEDGTGEVB Gerber Layout Files (Zip Format)NCP1014LEDGTGEVB_GERBER.ZIP (93.0kB)0
NCP1014LEDGTGEVB SchematicNCP1014LEDGTGEVB_SCHEMATIC (193kB)0
NCP1014LEDGTGEVB Test ProcedureNCP1014LEDGTGEVB_TEST_PROCEDURE.PDF (148.0kB)3
NCP1014STBUCGEVB ManualEVBUM2143/D (157.0kB)2
NCP1014STBUCGEVB Bill of Materials ROHS CompliantNCP1014STBUCGEVB_BOM_ROHS.PDF (78kB)1
NCP1014STBUCGEVB Gerber Layout Files (Zip Format)NCP1014STBUCGEVB_GERBER.ZIP (19.0kB)0
NCP1014STBUCGEVB SchematicNCP1014STBUCGEVB_SCHEMATIC.PDF (114.0kB)0
NCP1014STBUCGEVB Test ProcedureNCP1014STBUCGEVB_TEST_PROCEDURE.PDF (50.0kB)0
评估板与开发工具
产品状况Compliance简短说明
NCP1014LEDGTGEVBActivePb-free90-305 Vac, 0.8 Power Factor, 8 W LED Driver Evaluation Board
NCP1014STBUCGEVBActivePb-freePositive Output Buck Evaluation Board
产品订购型号
产品状况Compliance封装MSL*容器预算价格 (1千个数量的单价)
NCP1014AP065GActivePb-free Halide freePDIP-7626A-01NATube50$0.3
NCP1014AP100GActivePb-free Halide freePDIP-7626A-01NATube50$0.3
NCP1014APL065R2GObsoletePb-free Halide freePDIP-7626AA3Tape and Reel1000
NCP1014APL100R2GConsult Sales OfficePb-free Halide freePDIP-7626AA3Tape and Reel1000
NCP1014ST100T3GActivePb-free Halide freeSOT-223-4 / TO-261-4318E-041Tape and Reel4000$0.35
NCP1014ST65T3GActivePb-free Halide freeSOT-223-4 / TO-261-4318E-041Tape and Reel4000$0.35
订购产品技术参数
ProductControl Modefsw Typ (kHz)fJitter Typ (%)Stand-by ModeRDS(ON) Typ (Ω)V(BR)DSS Max (V)IPeak (mA)HV Start-up Min (V)DSS (mA)UVLOShort Circuit ProtectionOver Power CompensationBrown-outLatch
NCP1014AP065G Design itCurrent Mode65YesYes11700450Yes8YesYesNoNoYes
NCP1014AP100G Design itCurrent Mode100YesYes11700450Yes8YesYesNoNoYes
NCP1014ST100T3G Design itCurrent Mode100YesYes11700450Yes8YesYesNoNoYes
NCP1014ST65T3G Design itCurrent Mode65YesYes11700450Yes8YesYesNoNoYes
Self-Supplied Monolithic Switcher for Low Standby-Power Offline SMPS (346kB) NCP1014
Flyback Current Mode Loop Compensation Design Worksheet NCP1129
IsSpice model for NCP101X NCP1015
OrCAD model for NCP101X NCP1015
700 mA LED Power Supply Using Monolithic Controller and Off-Line Current Boosted (Tapped Inductor) Buck Converter NCP1014
A 6 W/12 W Universal Mains Adapter with the NCP101X NCP1015
An Off-Line, Power Factor Corrected, Buck-Boost Converter for Low Power LED Applications NCP1014
Designing Converters with the NCP101X Family NCP1015
Evaluating the Power Capability of NCP101X Members NCP1015
How to Choose Switching Controller for Design NCP1052
Implementing Simple Brown-Out Solution for NCP101X Series NCP1015
Increasing the Efficiency of Low Power Converters with Resonant Snubbers NCP1028
NCP101x LED Flasher with Luxeon V Star LED NCP1015
Non-isolated Negative Output Buck AC/DC Converter NCP1015
Non-isolated Positive Output Buck/Boost AC/DC Converter NCP1015
Nonisolated Negative Output Buck/Boost AC/DC Convertor MUR160
Nonisolated Positive Output Buck AC/DC Converter MUR160
Offline Buck Converter with Tapped Inductor Improves Performance NCP1055
Offline isolated power supply to drive 3 LEDs NCP1015
Performance Improvements to the NCP1012 Evaluation Board NCP1015
Simple Secondary Side Vcc Source for Low Power CVCC Power Supplies NCP4300A
Stability Analysis in Multiple Loop Systems NCP1055
Understanding Loop Compensation with Monolithic Switchers NCP1028
NCP1014LEDGTGEVB BOM ROHS NCP1014LEDGTGEVB
NCP1014LEDGTGEVB GERBER NCP1014LEDGTGEVB
NCP1014LEDGTGEVB SCHEMATIC - 193 KB NCP1014LEDGTGEVB
NCP1014LEDGTGEVB TEST PROCEDURE NCP1014LEDGTGEVB
EVBUM2143/D - 157 NCP1014STBUCGEVB
NCP1014STBUCGEVB BOM ROHS NCP1014STBUCGEVB
NCP1014STBUCGEVB GERBER NCP1014STBUCGEVB
NCP1014STBUCGEVB SCHEMATIC NCP1014STBUCGEVB
NCP1014STBUCGEVB TEST PROCEDURE NCP1014STBUCGEVB
PDIP-7 (PDIP-8 LESS PIN 6) NCP1077
PDIP (8 Minus Pin 6), Gull Wing NCP1014
SOT-223 (TO-261) 4 LEAD NCV8452
NCP1014