NCP1031: Integrated DC-DC Converter for PoE and Telecom
The NCP1030 and NCP1031 are a family of miniature high-voltage monolithic dc-dc converters with on-chip power switch and start-up circuits. The NCP103x family incorporates in a single IC all the active power, control logic and protection circuitry required to implement, with minimal external components, several switching regulator applications, such as a secondary side bias supply or a low power dc-dc converter.This controller family is ideally suited for 48 V telecom, 42 V automotive, 12 V input and Power Over Ethernet (PoE) applications. The NCP103x can be configured in any single-ended topology such as forward or flyback. The NCP1030 is targeted for applications requiring up to 3 W, and the NCP1031 is targeted for applications requiring up to 6 W.The internal error amplifier allows the NCP103x family to be easily configured for secondary or primary side regulation operation in isolated and non-isolated configurations. The fixed frequency oscillator is optimized for operation up to 1 MHz and is capable of external frequency synchronization, providing additional design flexibility. In addition, the NCP103x incorporates individual line undervoltage and overvoltage detectors, cycle by cycle current limit and thermal shutdown to protect the controller under fault conditions. The preset current limit thresholds eliminate the need for external sensing components.
特性- On Chip High 200 V Power Switch Circuit and Startup Circuit
- External Frequency Synchronization up to 1 MHz
- Internal Startup Regulator with Auxiliary Winding Override
- Trimmed 2% Internal Reference
- Line Under/Over Voltage Lockout
- Cycle by Cycle Current Limit
- Over Temperature Protection
- Internal Error Amplifier
- Primary or Secondary Regulation
- Excel Based Design Tool Available
| 优势- No external circuitry needed for high voltage start up
- Optimization of switching frequency for size and efficiency
- Smaller PCB footprint
- Accurate output voltage
- System level protection
- System level protection
- System level protection
- Smaller PCB footprint
- Flexibility in implementation
|
应用- Stand Alone Low Power dc−dc Converter
- Low Power Bias Supply
- Low Power Boost Converter
| 终端产品- POE (Power Over Ethernet)/PD. Refer to Application Note AND8247.
- Secondary Side Bias Supply for Isolated dc-dc Converters
|
封装
设计和开发工具 (1)
数据表 (1)
封装图纸 (2)
应用注释 (2)
仿真模型 (1)
评估板文档 (5)
评估板与开发工具
| 产品 | 状况 | Compliance | 简短说明 |
|---|
| NCP1031POEEVB | Active | | 6.5 W PoE DC-DC Converter Evaluation Board |
产品订购型号
| 产品 | 状况 | Compliance | 封装 | MSL* | 容器 | 预算价格 (1千个数量的单价） |
|---|
| NCP1031DR2G | Active | Pb-free
Halide free | SOIC-8 | 751-07 | 1 | Tape and Reel | 2500 | $0.7 |
| NCP1031MNTXG | Active | Pb-free
Halide free | DFN-8 | 488AF | 1 | Tape and Reel | 4000 | $0.74 |
订购产品技术参数
| Product | Topology | Control Mode | VCC Min (V) | VCC Max (V) | VO Typ (V) | IO Typ (A) | Efficiency (%) | fSW Typ (kHz) |
|---|
| NCP1031DR2G | Flyback
Step-Down
Step-Up | Voltage Mode | 8 | 200 | 12 | 1 | 85 | Up to 1000 |
| NCP1031MNTXG | Step-Up
Step-Down
Flyback | Voltage Mode | 8 | 200 | 12 | 1 | 85 | Up to 1000 |
