NIS5452MT1GEVB: eFuse Test Board with Multiple Subcircuits for Evaluation of Overvoltage Protection, Overcurrent Protection, Controlled Slew Rate, and Thermal Shutdown Features Evaluation Board
The NIS5452MT1GEVB evaluation board has many features which make it simple to observe the functionality and performance of the new NIS54xx line of eFuses including multiple connectors available for all eFuse pins (VCC, GND, enable, ILIM, dv/dt), input and output capacitors, a pushbutton switch and a MOSFET connect the enable pin to GND or float it as needed, green and yellow LEDs to indicate whether the eFuse enable pin voltage is high (device enabled) or low (device disabled), three current limit resistor options available directly on the board (10, 18, 50 ?), two load resistor options (5 and 10 ?) on the board, a pushbutton switch to short circuit the load, featuring an indicator LED which is on when the output voltage is high during normal operation, an easy means of connecting an external copper heat sink for thermal evaluation, kelvin or direct sensing options via the jumper between pin 1 and 2 for the NIS54xx.
评估/开发工具信息
| 产品 | 状况 | Compliance | 简短说明 | 所用产品 |
|---|
| NIS5452MT1GEVB | Active | Pb-free | eFuse Test Board with Multiple Subcircuits for Evaluation of Overvoltage Protection, Overcurrent Protection, Controlled Slew Rate, and Thermal Shutdown Features Evaluation Board | NIS5452MT1TXG |
技术文档
