NLSX4401: 1-Bit 20 Mb/s Dual-Supply
Level Translator
The NLSX4401 is a 1−bit configurable dual−supply bidirectional
auto sensing translator that does not require a directional control pin.
The I/O VCC and I/O VL ports are designed to track two different
power supply rails, VCC and VL respectively. Both the VCC and VL
supply rails are configurable from 1.5 V to 5.5 V. This allows voltage
logic signals on the VL side to be translated into lower, higher or
equal value voltage logic signals on the VCC side, and vice−versa.
The NLSX4401 translator has integrated 10 k pull−up resistors
on the I/O lines. The integrated pull−up resistors are used to pull up
the I/O lines to either VL or VCC. The NLSX4401 is an excellent
match for open−drain applications such as the I2C communication
bus.
特性- VL can be Less than, Greater than or Equal to VCC
- Wide VCC Operating Range: 1.5 V to 5.5 V
- Wide VL Operating Range: 1.5 V to 5.5 V
- High Speed with 24 Mb/s Guaranteed Date Rate
- Low Bit−to−Bit Skew
- Enable Input and I/O Pins are Overvoltage Tolerant (OVT) to Enable Input and I/O Pins are Overvoltage Tolerant (OVT) to 5.5 V
- Non−preferential Powerup Sequencing
- Power−Off Protection
|
数据表 (1)
封装图纸 (1)
产品订购型号
| 产品 | 状况 | Compliance | 封装 | MSL* | 容器 | 预算价格 (1千个数量的单价） |
|---|
| NLSX4401MU1TCG | Active | Pb-free
Halide free | UDFN-6 | 517AQ | 1 | Tape and Reel | 3000 | $0.2667 |
订购产品技术参数
| Product | Channels | Input Level | VCC Min (V) | VCC Max (V) | tpd Max (ns) | IO Max (mA) |
|---|
| NLSX4401MU1TCG | 1 | CMOS | 1.5 | 5.5 | 12 | 0.02 |
