技术特性| Grade | Automotive | | Channel Number [ch] | 1 | | Drain-Source Voltage (Max.)[V] | 42.0 | | Output Current[A] | 0.8 | | ON Resistance [mΩ] | 350 | | Over Current Detect [A] | 0.8 | | Active Clamp Energy [mJ] | 25.0 | | Supply Voltage(Min.)[V] | 3.5 | | Supply Voltage(Max.)[V] | 5.5 | | Current consumption(Typ.)[µA] | 500 | | Thermal Shut Down | Self-restart | | Open Load Detect [V] | 2.0 | | Status Terminal | Available | | Junction Temperature Tj (Min.)[°C] | -40 | | Junction Temperature Tj (Max.)[°C] | 150 |
| 技术资料下载产品特点- Built-in overcurrent limiting circuit
- Built-in thermal shutdown circuit (TSD)
- Built-in open load detection circuit (at output OFF)
- Enables direct control from CMOS logic ICs, etc.
- Low standby current
- Built-in under voltage lock out circuit
- Built-in diagnostic output (ST) terminal
- Low ON resistance RDS (ON) =350mΩ (Typ) (VDD=IN=5V,
- Ta=25°C, IOUT=0.25A)
- Built-in overvoltage protection (active clamp) for output circuit
- Monolithic power IC in which the control unit (CMOS) and power MOSFET are incorporated into one chip
- 1ch low side switch for driving mechanical relay coil
- AEC-Q100 Qualified
|
