EVAL-L9301:Evaluation board for L9301 multiple configurable H / LSD

The EVAL-L9301 is an Evaluation Board designed to evaluate L9301, a smart power device mainly for ABS valves applications.

L9301 is able to drive electronic on-off valves with or without external freewheeling diode.

The OUT1-8 can be driven by parallel input in PWM mode or SPI command. Through the SPI it is possible to configure the device parameters like configuration, Slew-rate, Overcurrent threshold, to send the drivers EVAL-L9301 commands and to read back the diagnosis results.

The device is protected against over temperature, open load, short to GND and short to Vbattery condition. The overcurrent diagnostics can be set in latched or unlatched mode for each channel.

This kit includes L9301 Demo Board; Firmware for SPC560P-DISP; Graphical User Interface developed in LabView environment Documentation, Demo board and GUI user manual.

Key Features

  • Operating battery supply voltage: 5V - 18V
  • Operating Vdd supply voltage: 4.75V - 5.25V
  • Logic inputs TTLcompatible
  • SPI interface for outputs control and for diagnosis data communication
  • Power MOS:
  • 8 Low side On-off driver
  • 4 High side + 4 Low side on-off driver
  • 4 configurable output configurations
  • Access to all relevant pins by test points and jumper.
  • Input signal connector compatible with SPC560P-DISP discovery board
  • Possibility to connect a generic microcontroller boards by using a simple adapter.
  • ISO PULSE circuit protection
  • Reset button or Reset uC
产品规格
DescriptionVersionSize
DB2978: EVAL-L9301 Demo board1.0226 KB
用户手册
DescriptionVersionSize
UM2091: EVAL-L9301 Demo board Hardware documentation1.01 MB
Board Manufacturing Specifications
DescriptionVersionSize
PCB Layout1.02 MB
Bill of Materials
DescriptionVersionSize
EVAL-L9301 BOM1.083 KB
Schematic Packs
DescriptionVersionSize
EVAL-L9301 schematic1.0538 KB
许可协议
DescriptionVersionSize
Evaluation products license agreement1.0125 KB
样片和购买
型号Unit Price (US$) *QuantityECCN (EU)ECCN (US)Country of Origin
EVAL-L9301--NECEAR99-
质量和可靠性
型号RoHS Compliance GradeMaterial Declaration**
EVAL-L9301Not compliant
EVAL-L9301 Demo board EVAL-L9301
EVAL-L9301 Demo board Hardware documentation EVAL-L9301
EVAL-L9301 Demo board Hardware documentation EVAL-L9301
EVAL-L9301 Demo board Hardware documentation EVAL-L9301
EVAL-L9301 Demo board Hardware documentation EVAL-L9301
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 ST-LINK-V2