LED6001:PWM-dimmable single channel LED driver with integrated boost controller

The LED6001 device is a LED driver that combines a boost controller and a high-side current sensing circuitry optimized for driving one string of high-brightness LEDs. The device is compatible with multiple topologies such as boost, SEPIC and floating load buck-boost. The brightness of the LEDs can be controlled through PWM dimming and analog dimming (10:1 ratio) by means of two independent pins. Enhanced PWM dimming can be obtained thanks to a MOSFET in series with the LED string and directly driven by a dedicated pin.

The high-side current sensing, in combination with a P-channel MOSFET, provides an effective protection in case the positive terminal of the LED string is shorted to ground. The high precision current sensing circuitry allows a LED current regulation reference within ± 4% accuracy over the whole temperature range and production spread.

A fault output (open-drain) informs the host system about faulty conditions: device overtemperature, output overvoltage (disconnected LED string) and LED overcurrent.

Key Features

  • Switching controller section
    • 5.5 V to 36 V input voltage range
    • Very low shutdown current: ISHDN < 10 μA
    • Internal +5 V LDO for gate driver supply
    • Internal +3.3 V LDO for device supply
    • Fixed frequency peak current mode control
    • Adjustable (100 kHz to 1 MHz) switching frequency
    • External synchronization for multi-device applications
    • High performance external MOSFET driver
    • Cycle-by-cycle external MOSFET OCP
    • Fixed internal soft-start
    • Programmable output OVP
    • Boost, buck-boost and SEPIC topologies supported
    • Thermal shutdown with autorestart
    • Output short-circuit detection
  • LED control section
    • Up to 60 V output voltage
    • Constant current control loop
    • High-side output current sensing circuitry
    • 30 to 300 mV differential sensing voltage
    • ± 4% output current reference accuracy
    • Output overcurrent protection
    • Sensing resistor failure protection
    • PWM dimming with auxiliary series switch
    • Analog dimming
产品规格
DescriptionVersionSize
DS10047: PWM-dimmable single channel LED driver with integrated boost controller3.0553 KB
应用手册
DescriptionVersionSize
AN4140: STLD41 output power capability1.01 MB
手册
DescriptionVersionSize
Brochure Power management guide05.20167 MB
STM32 Open Development Environment
型号制造商Description
X-NUCLEO-LED61A1STDC-DC LED driver expansion board based on LED6001 for STM32 Nucleo
解决方案评估工具
型号制造商Description
STEVAL-ILL049V1LED driver based on the LED6001
样片和购买
型号QuantityUnit Price (US$) *PackagePacking TypeOperating Temperature (°C) (min)Operating Temperature (°C) (max)ECCN (EU)ECCN (US)Country of Origin
LED600110000.945HTSSOP16Tube--NECEAR99MALAYSIA
LED6001TR10000.945HTSSOP16Tape And Reel--NECEAR99MALAYSIA
质量和可靠性
型号PackageGradeRoHS Compliance GradeMaterial Declaration**
LED6001HTSSOP16IndustrialEcopack2md_i0-wspc-htssop-wspc-16-wspc-4.4-wspc-pitch-wspc-0.65-wspc-expad_1bi0ux54aca.pdf
md_i0-wspc-htssop-wspc-16-wspc-4.4-wspc-pitch-wspc-0.65-wspc-expad_1bi0ux54aca.xml
LED6001TRHTSSOP16IndustrialEcopack2md_i0-wspc-htssop-wspc-16-wspc-4.4-wspc-pitch-wspc-0.65-wspc-expad_1bi0ux54aca.pdf
md_i0-wspc-htssop-wspc-16-wspc-4.4-wspc-pitch-wspc-0.65-wspc-expad_1bi0ux54aca.xml
PWM-dimmable single channel LED driver with integrated boost controller LED6001
STLD41 output power capability LED7707
Very low drop voltage regulators with inhibit KFXX
md_i0-wspc-htssop-wspc-16-wspc-4.4-wspc-pitch-wspc-0.65-wspc-expad_1bi0ux54aca.pdf LED6001
md_i0-wspc-htssop-wspc-16-wspc-4.4-wspc-pitch-wspc-0.65-wspc-expad_1bi0ux54aca.xml LED6001