ST485ERB:15 kV ESD protected, low power RS-485/RS-422 transceiver, [-40oC, 85oC] temperature range

The ST485E is al low power transceiver for RS485 and RS-422 communication. Each driver output and receiver input is protected against ±15KV electrostatic discharge (H.B.M.) ±8KV (IEC-1000-4-2 contact discharge) shocks, without latchup. These parts contain one driver and one receiver.

This transceiver draws 300µA (typ.) of supply current when unloaded or fully loaded with disabled drivers.

It operates from a single 5V supply.

Driver is short-circuit current limited and is protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state.

The ST485E is designed for bi-directional data communications on multipoint bus transmission line (half-duplex applciations).

Key Features

  • Allows up to 256 transceivers on the bus
  • ESD protection: ±15KV (H.B.M.) ±8KV (IEC-1000-4-2 contact discharge)
  • Operate from a single 5V supply
  • 30ns propagation delay, 5ns skew
  • Low quiescent current: 300µA
  • -7V to 12V common mode input voltage range
  • Designed for RS-485 interface application
  • 70mV tipycal input hysteresis
  • Current limiting and thermal shutdown for driver overload protection
  • Driver maintains high impedance in 3-state or with the power OFF
产品规格
DescriptionVersionSize
DS3023: ± 15 kV ESD protected, low-power RS-485/RS-422 transceiver8.0675 KB
应用手册
DescriptionVersionSize
AN1348: ST485: an RS-485 based interface with lower data bit errors3.2112 KB
手册
DescriptionVersionSize
Products and Solutions for Factory Automation and Control1.03 MB
样片和购买
型号PackagePacking TypeOperating Temperature (°C) (min)Operating Temperature (°C) (max)AutoshutdownUnit Price (US$) *QuantityECCN (EU)ECCN (US)Country of Origin
ST485ERBDRSO-8Tape And Reel-4085-0.821000NECEAR99CHINA
质量和可靠性
型号PackageGradeRoHS Compliance GradeMaterial Declaration**
ST485ERBDRSO-8IndustrialEcopack3
± 15 kV ESD protected, low-power RS-485/RS-422 transceiver ST485ERB
ST485: an RS-485 based interface with lower data bit errors ST26C31B
STEVAL-SPIMD20V1 demonstration kit based on the SPIMD20 integrated motor drive STEVAL-SPIMD20V1