ST6265C:8B MCU OTP,ROM,FASTROM,EPROM,A/D,TIMER,EEPROM

The ST62T55C, ST62T65C and ST62E65C devices are low cost members of the ST62xx 8-bit HCMOS family of microcontrollers, which is targeted at low to medium complexity applications. All ST62xx devices are based on a building block approach: a common core is surrounded by a number of on-chip peripherals.

The ST62E65C is the erasable EPROM version of the ST62T65C device, which may be used to emulate the ST62T55C and ST62T65C device, as well as the respective ST6255C and ST6265C ROM devices.

OTP and EPROM devices are functionally identical. The ROM based versions offer the same functionality selecting as ROM options the options defined in the programmable option byte of the OTP/EPROM versions.

OTP devices offer all the advantages of user programmability at low cost, which make them the ideal choice in a wide range of applications where frequent code changes, multiple code versions or last minute programmability are required.

These compact low-cost devices feature a Timer comprising an 8-bit counter and a 7-bit programmable prescaler, an 8-bit Auto-Reload Timer, EEPROM data capability (except ST62T55C), a serial port communication interface, an 8-bit A/D Converter with 13 analog inputs and a Digital Watchdog timer, making them well suited for a wide range of automotive, appliance and industrial applications.

Key Features

  • User Programmable Options
  • Data EEPROM: 128 bytes (none on ST62T55C)
  • 8 I/O lines can sink up to 30mA to drive LEDs or TRIACs directly
  • 21 I/O pins, fully programmable as:Input with pull-up resistorInput without pull-up resistorInput with interrupt generationOpen-drain or push-pull outputAnalog Input
  • 8-bit Auto-reload Timer with 7-bit programmable prescaler (AR Timer)
  • 8-bit Timer / Counter with 7-bit programmable prescaler
  • Oscillator Safe Guard
  • Digital Watchdog
  • Low Voltage Detector for Safe Reset
  • 8-bit Synchronous Peripheral Interface (SPI)
  • 8-bit A/D Converter with 13 analog inputs
  • User configurable Power-on Reset
  • On-chip Clock oscillator can be driven by Quartz Crystal Ceramic resonator or RC network
  • ST626x-EMU2 Emulation and Development System (connects to an MS-DOS PC via a parallel port)
  • One external Non-Maskable Interrupt
  • Data Storage in Program Memory:User selectable size
  • Look-up Table capability in Program Memory
  • 3.0 to 6.0V Supply Operating Range
  • -40 to +125˚C Operating Temperature Range
  • 8 MHz Maximum Clock Frequency
  • 5 Interrupt Vectors
  • Data RAM: 128 bytes
  • Run, Wait and Stop Modes
产品规格
DescriptionVersionSize
DS1502: 8-bit MCUs with ADC, safe reset, auto-reload timer, EEPROM and SPI3.21 MB
应用手册
DescriptionVersionSize
AN859: An intelligent one hour multicharger for Li-Ion, NiMH and NiCd batteries1.4338 KB
AN414: Controlling a brushed DC motor with an ST6265C or ST6260C MCU2.1278 KB
AN435: Designing with microcontrollers in noisy environments1.4218 KB
AN594: Direct LCD drive with ST621xx and ST626xx2.3858 KB
AN1709: EMC design guide for ST microcontrollers2.0843 KB
AN1181: Electrostatic discharge sensitivity measurement1.649 KB
AN420: Expanding A/D resolution of the ST6 A/D converter2.1119 KB
AN417: From nickel-cadmium to nickel-hydride fast battery charger2.1300 KB
AN1369: Getting started with Raisonance IDE for the ST6 microcontroller1.42 MB
AN422: Improved Universal Motor Drive1.5111 KB
AN863: Improved sensorless control with the ST62 MCU for universal motor2.4198 KB
AN1050: Input capture with ST62 16-bit auto-reload timer1.665 KB
AN591: Input capture with ST62 auto-reload timer2.352 KB
AN1464: Low-cost double Li-Ion battery charger using ST6255C/ST6265C MCU1.4318 KB
AN392: Microcontrollers and TRIAC-based dimmers2.3132 KB
AN434: Movement detector concepts for noisy environments1.572 KB
AN1016: Notes on using the ST623XB/ST628XB UART1.223 KB
AN672: OPTIMIZING THE ST6 A/D CONVERTER ACCURACY2.327 KB
AN592: PLL generation using ST62 auto-reload timer2.356 KB
AN590: PWM generation with ST62 auto-reload timer1.3116 KB
AN913: PWM generation with the ST62 16-bit auto-reload timer1.5115 KB
AN677: Painless microcontroller code by graphical application description2.3207 KB
AN671: Prevention of data corruption in ST6 on-chip EEPROM2.339 KB
AN673: Reducing current consumption at 32 kHz with ST622.336 KB
AN911: ST6 micro is EMC champion1.4477 KB
AN593: ST62 in-circuit programming2.350 KB
AN885: ST62 microcontrollers drive home appliance motor technology1.5173 KB
AN1068: Selecting between ROM, FASTROM and Flash for a microcontroller1.489 KB
AN886: Selecting between ROM, FASTROM and OTP for a microcontroller1.3124 KB
AN1501: Simple microcontrolled ballast1.4135 KB
AN669: Simple reset circuits for the ST61.234 KB
AN1447: Software driver for 4-multiplexed LCD with a standard ST621.4202 KB
AN975: Upgrading from ST625X/6XB to ST625X/6XC1.472 KB
AN432: Using ST62XX I/O ports safely1.4388 KB
AN914: Using the ST626X SPI as a UART1.4109 KB
AN1127: Using the ST62T6XC/5XC SPI in master mode1.515 KB
Technical Notes & Articles
DescriptionVersionSize
TN1163: Description of WLCSP for microcontrollers and recommendations for its use4.01 MB
编程手册
DescriptionVersionSize
PM0001: ST6 family programming manual2.3582 KB
发布说明
DescriptionVersionSize
RN0038: ST6 Windows Epromer release 4.0.31.232 KB
Hardware Development Tools
型号制造商Description
STX-RLINKRaisonanceIn-circuit debugger/programmer for STM8, ST7, STM32, STR7 and STR9 microcontrollers
MCUs Embedded Software
型号制造商Description
STSW-ST6002STSources for ST622XC-KIT, ST623X-KIT and ST626XC-KIT Starter Kits written in MAST6/RLST6 syntax (Raisonance IDE)
STSW-ST6003STSimple Microcontrolled Ballast
STSW-ST6004STMicrocontroller and Triacs on the 110/240v Mains
STSW-ST6008STST6 Tutorial Exercises V1.0.2 for the ST6 Evaluation Board
STSW-ST6009STST62 Noise Immunity Install
STSW-ST6010STGetting started with Raisonnance IDE for ST6 microcontrollers
STSW-ST6011STSoftware driver for 4-multiplexed LCD with a standard ST62
STSW-ST6012STHow to Reduce 3rd Harmonics with ST6200C Motor Control Software
STSW-ST6013STST6200C Universal Motor Drive Software
STSW-ST6014STLow-cost double Li-Ion battery charger using ST6255C/ST6265C MCU
STSW-ST6015STST6 - Controlling a brush DC motor with an ST6265
STSW-ST6016STSensorless Motor Drive with the ST62 MCU + Triac
STSW-ST6017STST6 - From Nickel-Cadmium to Nickel-Hydride fast battery charger
STSW-ST6018STDirect Software LCD Drive with ST621x and ST626x
STSW-ST6019STImproved Sensorless Control with the ST62 MCU for Universal Motor
样片和购买
型号QuantityUnit Price (US$) *PackagePacking TypeOperating Temperature (°C) (min)Operating Temperature (°C) (max)ECCN (EU)ECCN (US)Country of Origin
ST62T65CM6--SO-28Tube-4085NECEAR99-
质量和可靠性
型号PackageGradeRoHS Compliance GradeMaterial Declaration**
ST62T65CM6SO-28IndustrialEcopack1
8-bit MCUs with ADC, safe reset, auto-reload timer, EEPROM and SPI ST6265C
circuit_diagram_6220_thumbnail.png ST6265C
An intelligent one hour multicharger for Li-Ion, NiMH and NiCd batteries ST6262C
Controlling a brushed DC motor with an ST6265C or ST6260C MCU STSW-ST6015
Designing with microcontrollers in noisy environments ST6262C
Direct LCD drive with ST621xx and ST626xx STSW-ST6018
EMC design guide for ST microcontrollers STM8L101G3
Electrostatic discharge sensitivity measurement STM8L101G3
Expanding A/D resolution of the ST6 A/D converter ST6262C
From nickel-cadmium to nickel-hydride fast battery charger STSW-ST6017
Getting started with Raisonance IDE for the ST6 microcontroller ST6262C
Improved Universal Motor Drive ST6262C
Improved sensorless control with the ST62 MCU for universal motor STSW-ST6019
Input capture with ST62 16-bit auto-reload timer ST6262C
Input capture with ST62 auto-reload timer ST6262C
Low-cost double Li-Ion battery charger using ST6255C/ST6265C MCU STSW-ST6014
Microcontrollers and TRIAC-based dimmers ST6262C
Movement detector concepts for noisy environments ST6262C
Notes on using the ST623XB/ST628XB UART ST6262C
OPTIMIZING THE ST6 A/D CONVERTER ACCURACY ST6262C
PLL generation using ST62 auto-reload timer ST6262C
PWM generation with ST62 auto-reload timer ST6262C
PWM generation with the ST62 16-bit auto-reload timer ST6262C
Painless microcontroller code by graphical application description ST6262C
Prevention of data corruption in ST6 on-chip EEPROM ST6262C
Reducing current consumption at 32 kHz with ST62 ST6262C
ST6 micro is EMC champion ST6262C
ST62 in-circuit programming ST6262C
ST62 microcontrollers drive home appliance motor technology ST6262C
Selecting between ROM, FASTROM and Flash for a microcontroller ST92F150CV1
Selecting between ROM, FASTROM and OTP for a microcontroller STR910FAW32
Simple microcontrolled ballast ST6262C
Simple reset circuits for the ST6 ST6262C
Software driver for 4-multiplexed LCD with a standard ST62 ST6262C
Upgrading from ST625X/6XB to ST625X/6XC ST6262C
Using ST62XX I/O ports safely ST6262C
Using the ST626X SPI as a UART ST6262C
Using the ST62T6XC/5XC SPI in master mode ST6262C
Description of WLCSP for microcontrollers and recommendations for its use STM8L101G3
ST6 family programming manual ST6262C
ST6 Windows Epromer release 4.0.3 ST6262C