• 简体中文
• English

STEF033：Electronic fuse for 3.3 V line

The STEF033 is an integrated electronic fuse optimized for monitoring output current and the input voltage. Connected in series to the 3.3 V rail, it is able to protect the electronic circuitry on its output from overcurrent and overvoltage. The STEF033 has controlled delay and turn-on time. When an overload condition occurs, the device limits the output current to a predefined safe value. If the anomalous overload condition persists, it goes into an open state, disconnecting the load from the power supply. If a continuous short-circuit is present on the board, when the power is re-applied the E-fuse initially limits the output current to a safe value and then goes again into the open state. The voltage clamping circuit prevents the output voltage from exceeding a fixed value, if the input voltage goes beyond this threshold. The device is equipped with a thermal protection circuit. Intervention of thermal protection is signaled to the board-monitoring circuits through an appropriate signal on the Fault pin. Unlike mechanical fuses, which must be physically replaced after a single event, the E-fuse does not degrade in its performances following short-circuit/thermal protection intervention and is reset either by re-cycling the supply voltage or using the appropriate Enable pin. The STEF033 is also available in an auto-retry version; in case of thermal fault it automatically attempts to re-apply power to the load when the die temperature returns to a safe value.

Key Features

• Continuous current typ.: 3.6 A (DFN), 2.5 A (Flip Chip)
• N-channel on resistance (typ): 40 mΩ (DFN), 25 mΩ (Flip Chip)
• Enable/Fault functions
• Output clamp voltage (typ): 4.5 V
• Undervoltage lockout
• Short-circuit limit
• Overload current limit
• Controlled output voltage ramp
• Thermal latch (typ): 160 °C
• Uses tiny capacitors
• Latching and auto-retry versions
• Operative junction temp. - 40 °C to 125 °C
• Available in DFN10 3x3 and Flip Chip 9 bumps

产品规格

选型指南

样片和购买

质量和可靠性