STEVAL-IHM029V2:Universal motor control evaluation board based on the STM8S103F2 MCU and T1235T Triac

The STEVAL-IHM029V2 is a low-cost universal motor control evaluation board designed for the home appliance market, with particular focus on vacuum cleaners, food processors and power tools. This system features the 20-pin, 8-bit STM8S103F2 microcontroller running at 16 MHz (user-trimmable internal RC clock), featuring 4 KB of Flash memory, a 10-bit A/D converter, 8/16 bit timers, communication interfaces and 640 bytes of E2PROM. The power supply circuitry features the VIPer16L, an off-line converter with an 800 V avalanche-rugged power section, operating at 60 kHz.

The STEVAL-IHM029V2 especially targets vacuum cleaner applications with power up to 900 W and fulfills the requirements of the 2009/125/EC EU directive, applicable starting in September 2017, thanks to the T1235T, a 12 A 800 V high performance Triac. The motor control is based on phase-angle.

In order to limit in-rush current and possible current peaks, the evaluation board features a soft-start routine and a smooth power change function. The board passed the pre-compliance tests for EMC directives IEC 61000-4-4 (burst up to 8 kV) and IEC 61000-4-5 (surge up to 2 kV). In standby mode, the STEVAL-IHM029V2 has an overall power consumption below 300 mW.

Key Features

  • Input voltage range: 90-265 VAC, 50/60 Hz
  • 12 VDC / 5 VDC auxiliary power supply based on the VIPer16L in buck converter topology
  • Total power consumption below 300 mW in standby mode
  • Maximum output power: 1500 W
  • 20-pin, 8-bit STM8S103F2 MCU as main controller
  • Employs zero-voltage switching (ZVS) to synchronize MCU events with the voltage mains
  • Motor driven by T1235T Triac in phase-angle control
  • 5 power levels and standby mode selectable by potentiometer
  • 5 LEDs to display the power level of the board
  • “RUN” LED to indicate the board is functioning
  • Standard in-circuit programming connector
  • IEC 61000-4-4 pre-compliance test passed (burst up to 8 kV)
  • IEC 61000-4-5 pre-compliance test passed (surge up to 2 kV)
  • RoHS compliant
产品规格
DescriptionVersionSize
DB2492: Universal motor control evaluation board based on the STM8S103F2 MCU and T1235T Triac1.0214 KB
用户手册
DescriptionVersionSize
UM1856: STEVAL-IHM029V2: Universal motor control evaluation board based on the STM8S103F2 MCU and T1235T Triac1.01 MB
Board Manufacturing Specifications
DescriptionVersionSize
STEVAL-IHM029V2 gerber files1.0225 KB
Bill of Materials
DescriptionVersionSize
STEVAL-IHM029V2 BOM1.051 KB
Schematic Packs
DescriptionVersionSize
STEVAL-IHM029V2 schematic1.050 KB
手册
DescriptionVersionSize
Products and Solutions for Factory Automation and Control1.03 MB
许可协议
DescriptionVersionSize
Evaluation products license agreement1.0125 KB
Evaluation Tool Software
型号制造商Description
STSW-IHM029V2STSTEVAL-IHM029V2 firmware setup
样片和购买
型号Core ProductUnit Price (US$) *QuantityECCN (EU)ECCN (US)Country of Origin
STEVAL-IHM029V2T1635T-8FP, VIPER16, STTH1R0699.231NECEAR99ITALY
质量和可靠性
型号PackageGradeRoHS Compliance GradeMaterial Declaration**
STEVAL-IHM029V2CARDIndustrialEcopack2
Universal motor control evaluation board based on the STM8S103F2 MCU and T1235T Triac STEVAL-IHM029V2
STEVAL-IHM029V2: Universal motor control evaluation board based on the STM8S103F2 MCU and T1235T Triac STEVAL-IHM029V2
STEVAL-IHM029V2: Universal motor control evaluation board based on the STM8S103F2 MCU and T1235T Triac STEVAL-IHM029V2
STEVAL-IHM029V2: Universal motor control evaluation board based on the STM8S103F2 MCU and T1235T Triac STEVAL-IHM029V2
STEVAL-IHM029V2: Universal motor control evaluation board based on the STM8S103F2 MCU and T1235T Triac STEVAL-IHM029V2
STEVAL-SPIMD20V1 demonstration kit based on the SPIMD20 integrated motor drive STEVAL-SPIMD20V1
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 ST-LINK-V2