• 简体中文
• English

STEVAL-ILD003V1：Analog wall dimmer for CFL/LED lamps based on the TS820 (EU version 220 V)

The STEVAL-ILD003V1 demonstration board is designed to propose a low-cost analog dimmer topology using a sensitive SCR TS820-600FP. The dimmer can drive typical low-consumption lamps, particularly CFL and LED dimmable lamps.

Through-hole technology is used for the most important components such as LC filter, gate resistor, turn-on delay capacitor, etc., in order to allow board modification, if needed.

The STEVAL-ILD003V1 eliminates flickering thanks to its continuous current applied through the sensitive SCR gate. This dimmer could easily replace a standard low-cost analog Triac light dimmer using a Diac-controlled circuit.

Key Features

• Operation for 2-wire wall dimmer
• Leading-edge control (compatible with all lamps commonly found on the market)
• Operation on 230 V line rms voltage (198 to 264 V) and 50 Hz or 60 Hz line frequency
• Dimmable power range with halogen, CFL and LED lamps (without heatsinks mounted on SCRs1):
  • 3 to 350 W for 230 V rms line
• Maximum operating ambient temperature: 60 °C
• Power efficiency @ 350 W / 230 V > 99%
• Standby losses @ 230 V < 0.5 W (could be reduced to 0 if potentiometer features a mechanical switch to open the circuit at minimum setting)
• RoHS compliant
• Compliance with EMC standards
  • IEC 61000-4-4: criteria A for more than 2 kV
  • Compliant with EN55015 with 350 W / 230 V halogen lamp

产品规格

用户手册

Board Manufacturing Specifications

Bill of Materials

Schematic Packs

许可协议

样片和购买

质量和可靠性