STP08DP05:Low-voltage 8-bit constant current LED sink with full outputs error detection

The STP08DP05 is a monolithic, low voltage, low current power 8-bit shift register designed for LED panel displays. The STP08DP05 contains a 8-bit serial-in, parallel-out shift register that feeds a 8-bitD-type storage register. In the output stage, eight regulated current sources were designed to provide 5-100 mA constant current to drive the LEDs.

The STP08DP05 is backward compatible in the functionality and footprint with STP8C/L596 and extends its functionality with open and short detection on the outputs. The detection circuit checks 3 different conditions that can occur on the output line: short to GND, short to VOor open line. The data detection results are loaded in the shift register and shifted out via the serial line output.

The detection functionality is implemented without increasing the pin number, through a secondary function of the output enable and latch pin (DM1 and DM2 respectively), a dedicated logic sequence allows the device to enter or leave from detection mode. Through an external resistor, users can adjust the STP08DP05 output current, controlling in this way the light intensity of LEDs, in addition, user can adjust LED’s brightness intensity from 0% to 100% via OE/DM2pin.

The STP08DP05 guarantees a 20 V output driving capability, allowing users to connect more LEDs in series. The high clock frequency, 30 MHz, also satisfies the system requirement of high volume data transmission. The 3.3 V of voltage supply is well useful for applications that interface any micro from 3.3 V. Compared with a standard TSSOP package, the TSSOP exposed pad increases heat dissipation capability by a 2.5 factor.

Key Features

  • Low voltage power supply down to 3 V
  • 8 constant current output channels
  • Adjustable output current through external resistor
  • Short and open output error detection
  • Serial data IN/parallel data OUT
  • 3.3 V micro driver-able
  • Output current: 5-100 mA
  • 30 MHz clock frequency
  • Available in high thermal efficiency TSSOP exposed pad
  • ESD protection 2.5 kV HBM, 200 V MM
产品规格
DescriptionVersionSize
DS5223: Low voltage 8-bit constant current LED sink with full outputs error detection5.0666 KB
应用手册
DescriptionVersionSize
AN3981: LED array drivers1.13 MB
AN2478: STP08DP05, STP16DP05 Normal mode and error detection features3.21 MB
手册
DescriptionVersionSize
Brochure Power management guide05.20167 MB
解决方案评估工具
型号制造商Description
STEVAL-ILL002V4STHigh-brightness LED driver with diagnostics (40 LEDs) demonstration board based on the STP08DP05
样片和购买
型号QuantityUnit Price (US$) *PackagePacking TypeOperating Temperature (°C) (min)Operating Temperature (°C) (max)ECCN (EU)ECCN (US)Country of Origin
STP08DP05MTR10000.275SO-16Tape And Reel-40125NECEAR99MOROCCO
STP08DP05TTR10000.284TSSOP 16Tape And Reel-40125NECEAR99CHINA
STP08DP05XTTR10000.403HTSSOP16Tape And Reel-40125NECEAR99MALAYSIA
质量和可靠性
型号PackageGradeRoHS Compliance GradeMaterial Declaration**
STP08DP05MTRSO-16IndustrialEcopack1
STP08DP05TTRTSSOP 16IndustrialEcopack2 (**)
STP08DP05XTTRHTSSOP16IndustrialEcopack2
Low voltage 8-bit constant current LED sink with full outputs error detection STP08DP05
circuit_diagram_13405_thumbnail.png STP08DP05
LED array drivers STP08CP05
STP08DP05, STP16DP05 Normal mode and error detection features STP16DP05
Very low drop voltage regulators with inhibit KFXX