STULPI01A:High speed USB On-The-Go ULPI transceiver

The STULPI01 is a high-speed USB 2.0 transceiver compliant with ULPI (UTMI+ low pin interface) and OTG (On-The-Go) specifications, providing a complete physical layer solution for any high-speed USB host, device or OTG dual-role core. It allows USB ASICs to interface with the physical layer of the USB through a 12-pin interface. It contains VBUS comparators, an ID line detector, USB differential drivers and receivers and a complete ULPI register map and interrupt generator. The STULPI01 transceiver is suitable for mobile applications and battery-powered devices because of its low-power consumption, Power-down operating mode and minimal die/package dimensions.

Key Features

  • USB-IF high-speed certified to the universal serial bus specification rev. 2.0
  • Meets the requirements of the universal serial bus specification rev. 2.0, On-The-Go supplement to the USB 2.0 specification 1.0a and ULPI transceiver specification 1.1
  • Standard ULPI (UTMI+ low pin interface) 1.1 digital interface
  • Fully compliant with ULPI 1.1 register set
  • External square wave clock with VDVIO amplitude must be applied to oscillator input XI
  • Supports 480 Mbit/s High-speed, 12 Mbit/s Full-speed and 1.5 Mbit/s Low-speed modes of operation
  • Supports 2.7 V UART mode
  • Supports session request protocol (SRP) and host negotiation protocol (HNP) for dual-role device features
  • Ability to control external charge pump for higher VBUS currents
  • Single supply, +3 V to +4.5 V voltage range
  • Integrated dual voltage regulator to supply internal circuits with stable 3.3 V and 1.2 V
  • Integrated overcurrent detector
  • Integrated HS termination and FS/LS/OTG pull-up/pull-down resistors
  • Integrated USB 2.0 “short-circuit withstand” protection
  • Power-down mode with very low-power consumption for battery-powered devices
  • Ideal for system ASICs with built-in USB host, device or OTG cores
  • Available in μTFBGA36 RoHS package
  • –40 to 85 °C operating temperature range
产品规格
DescriptionVersionSize
DS5865: High-speed USB On-The-Go ULPI transceiver4.01 MB
HW Model & CAD Libraries
DescriptionVersionSize
STULPI01 Pspice model37 KB
样片和购买
型号PackagePacking TypeUnit Price (US$) *QuantityECCN (EU)ECCN (US)Country of Origin
STULPI01ATBRTFBGA 36 3.6x3.6Tape And Reel3.921000NECEAR99MALAYSIA
质量和可靠性
型号PackageGradeRoHS Compliance GradeMaterial Declaration**
STULPI01ATBRTFBGA 36 3.6x3.6IndustrialEcopack3
High-speed USB On-The-Go ULPI transceiver STULPI01B
circuit_diagram_14817_thumbnail.png STULPI01B
High-speed USB On-The-Go ULPI transceiver STULPI01B