SAC Series - 500W Axial Lead Transient Voltage Suppresssion (TVS) Diode

The SAC Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

Features:

Glass passivated chip junction in DO-15 Package
500W peak pulse power capability at 10×1000μs waveform, repetition rate (duty cycles):0.01%
Fast response time: typically less than 1.0ps from 0 Volts to BV min
Typical failure mode is short from over-specified voltage or current
Whisker test is conducted based on JEDECJESD201A per its table 4a and 4c
IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact)
ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2)
EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4)
Low incremental surge resistance
High temperature soldering guaranteed: 260°C/40 seconds / 0.375”,(9.5mm) lead length, 5 lbs., (2.3kg) tension
Plastic package has underwriters laboratory flammability classification 94V-O
Matte tin lead–free plated
Ideal for data line applications
Halogen free and R

Ordering Information

Catalog #	VR (Vso)	Watts (W)	IPP 10x1000μs (A)	MIN VBR@IT(V)	IT(mA)	Ir@Vso(μA)	MaxTemp(deg C)	VC at IPP=5.0A
SAC10	10	500	29	11.100	1	5	150	16.3
SAC12	12	500	25	13.300	1	1	150	19
SAC15	15	500	20	16.700	1	1	150	23.6
SAC18	18	500	15	20.000	1	1	150	28.8
SAC22	22	500	14	24.400	1	1	150	35.4
SAC26	26	500	11.1	28.900	1	1	150	42.3
SAC30	30	500	10	33.300	1	1	150	48.6
SAC36	36	500	8.6	40.000	1	1	150	60
SAC45	45	500	6.8	50.000	1	1	150	77
SAC5.0	5	500	44	7.600	1	300	150	10
SAC50	50	500	5.8	55.500	1	1	150	88
SAC6.0	6	500	41	7.900	1	300	150	11.2
SAC7.0	7	500	38	8.330	1	300	150	12.6
SAC8.0	8	500	36	8.890	1	100	150	13.4
SAC8.5	8.5	500	34	9.440	1	50	150	14