Sensitive Triacs Series -
DataSheet:Switching Thyristors Sensitive Triacs Series Datasheet
Teccor brand line of sensitive gate triacs includes devices with current capabilities through 8A. Voltage ranges are available from 200V to 600V. This line features devices with guaranteed gate control in Quadrants II and IV as well as control in the commonly used Quadrants I and III. Four-quadrant control devices require sensitive gate triacs. They can be controlled by digital circuitry where positive-only or negative-only pulses must control AC current in both directions through the device. Note that triacs with low IGT values in Quadrants II and IV will have lower dv/dt characteristics.
The sensitive gate triac is a bidirectional AC switch and is gate controlled for either polarity of main terminal voltage. It is used
primarily for AC switching and phase control applications such as motor speed controls, temperature modulation controls, and lighting controls.
The epoxy TO-92 and TO-220 configurations feature Littelfuse's electrically-isolated construction where the case or mounting tab is internally isolated from the semiconductor chip and lead attachments. Non-isolated epoxy TO-202 packages are available as well as TO-251 and surface mount TO-252 (D-Pak). Tapeand-reel capability and tube packing also are available.
All Teccor triacs have glass-passivated junctions. This glassing process prevents migration of contaminants and ensures longterm
device reliability with parameter stability.
Variations of devices covered in this data sheet are available for custom design applications. Consult factory for more information.
Notes:- All measurements are made at 60 Hz with a resistive load at an ambient temperature of +25°C unless otherwise specified.
- Operating temperature range (Tj) is -65°C to +110°C for TO-92 devices and -40°C to +110°C for all other devices.
- Storage temperature range (Ts) is -65°C to +150°C for TO-92 devices, -40°C to +150°C for TO-202 devices, and -40°C to +125°C for TO-220 devices.
- Lead solder temperature is a maximum of 230°C for 10 s maximum at a minimum of 1/16"(1.59 mm) from case.
- The case or lead temperature (Tc or Tl) is measured as shown on dimensional outline drawings. See Package Dimensions.
Ordering Information
| Catalog # | Size | IT(RMS) (A) | VDRM(V) | IDRM@VDRM25°C(mA) | IDRM@VDRM110°C(mA) | IGTQ1MAX(mA) | IGTQ2MAX(mA) | IGTQ3MAX(mA) | IGTQ4MAX(mA) | VTM(V) |
|---|---|---|---|---|---|---|---|---|---|---|
| L2004F31Obsolete: 2007-12-10Replaced By: L4004V3L4004L3 | TO-202 | 4 | 200 | 0.01 | 0.2 | 3 | 3 | 3 | 3 | 1.6 |
| L2004F51Obsolete: 2007-12-10Replaced By: L4004V5L4004L5 | TO-202 | 4 | 200 | 0.01 | 0.2 | 5 | 5 | 5 | 5 | 1.6 |
| L2004F61Obsolete: 2007-12-10Replaced By: L4004V6L4004L6 | TO-202 | 4 | 200 | 0.01 | 0.2 | 5 | 5 | 5 | 10 | 1.6 |
| L2004F81Obsolete: 2007-12-10Replaced By: L4004V8L4004L8 | TO-202 | 4 | 200 | 0.01 | 0.2 | 10 | 10 | 10 | 20 | 1.6 |
| L4004F31Obsolete: 2007-12-10Replaced By: L4004V3L4004L3 | TO-202 | 4 | 400 | 0.01 | 0.2 | 3 | 3 | 3 | 3 | 1.6 |
| L4004F51Obsolete: 2007-12-10Replaced By: L4004V5L4004L5 | TO-202 | 4 | 400 | 0.01 | 0.2 | 5 | 5 | 5 | 5 | 1.6 |
| L4004F61Obsolete: 2007-12-10Replaced By: L4004V6L4004L6 | TO-202 | 4 | 400 | 0.01 | 0.2 | 5 | 5 | 5 | 10 | 1.6 |
| L4004F81Obsolete: 2007-12-10Replaced By: L4004V8L4004L8 | TO-202 | 4 | 400 | 0.01 | 0.2 | 10 | 10 | 10 | 20 | 1.6 |
| L6004F31Obsolete: 2007-12-10Replaced By: L6004V3L6004L3 | TO-202 | 4 | 600 | 0.01 | 0.2 | 3 | 3 | 3 | 3 | 1.6 |
| L6004F51Obsolete: 2007-12-10Replaced By: L6004V5L6004L5 | TO-202 | 4 | 600 | 0.01 | 0.2 | 5 | 5 | 5 | 5 | 1.6 |
| L6004F61Obsolete: 2007-12-10Replaced By: L6004V6L6004L6 | TO-202 | 4 | 600 | 0.01 | 0.2 | 5 | 5 | 5 | 10 | 1.6 |
| L6004F81Obsolete: 2007-12-10Replaced By: L6004V8L6004L8 | TO-202 | 4 | 600 | 0.01 | 0.2 | 10 | 10 | 10 | 20 | 1.6 |
Resources
- Wuxi ISO TS16949 Certification
- Fundamental Characteristics of Thyristors Application Note
- Gating Latching and Holding of SCRs and Triacs Application Note
- Mounting and Handling of Semiconductor Devices Application Note
- Surface Mount Soldering Recommendations Application Note
- AN1006 Testing Teccor Semiconductor Devices Using Curve Tracers
- AN1009 Teccor Thyristors Miscellaneous Design Tips and Facts
- Teccor Sensitive Triac Data Sheet
- Power Thyristor Databook Package Dimensions
- Power Thyristor Databook Lead Form Options
- Product Selection Guide
- Circuit Protection Technology Application Matrix
- Switching Thyristor Product Catalog
- Switching Thyristors Sensitive Triacs Series Datasheet sensitive-triacs
- Fundamental Characteristics of Thyristors Application Note dxx15l-dxx20l-dxx25l
- Gating Latching and Holding of SCRs and Triacs Application Note sensitive-triacs
- Mounting and Handling of Semiconductor Devices Application Note dxx15l-dxx20l-dxx25l
- Surface Mount Soldering Recommendations Application Note dxx15l-dxx20l-dxx25l
- AN1006 Testing Teccor Semiconductor Devices Using Curve Tracers dxx15l-dxx20l-dxx25l
- AN1009 Teccor Thyristors Miscellaneous Design Tips and Facts dxx15l-dxx20l-dxx25l
- Power Thyristor Databook Package Dimensions qxxxxltx
- Power Thyristor Databook Lead Form Options qxxxxltx
- Product Selection Guide ra
- Circuit Protection Technology Application Matrix ra
- Switching Thyristor Product Catalog dxx15l-dxx20l-dxx25l
- SENSITIVE-TRIACS
