AD5062 2.7 V-5.5 V, Full Accurate 16-Bit VOUT nanoDAC® Converter, Unbuffered, in a Sot 23
This part exhibits very low glitch on power-up.
Product Highlights
Available in a tiny 8-lead SOT-23 package.
16-bit accurate, 1 LSB INL.
Low glitch on power-up.
High speed serial interface with clock speeds up to 30 MHz.
Three power-down modes available to the user.
Reset to known output voltage (zero-scale or mid-scale).
Applications
Process control
Data acquisition systems
Portable battery-powered instruments
Digital gain and offset adjustment
Programmable voltage and current sources
Programmable attenuators
The AD5062, a member of ADI’s nanoDAC® family, is a low power, single 16-bit unbuffered voltage-out DAC that operates
from a single 2.7 V to 5.5 V supply. The part offers a relative accuracy specification of ±1 LSB, and operation is guaranteed monotonic with a ±1 LSB DNL specification. The part uses a versatile 3-wire serial interface that operates at clock rates up to 30 MHz, and is compatible with standard SPI®, QSPI™, MICROWIRE™, and DSP interface standards. The reference for the AD5062 is supplied from an external VREF pin. A reference buffer is also provided on-chip. The part incorporates a power-on reset circuit that ensures the DAC output powers up to zero scale or mid-scale and remains there until a valid write takes place to the device. The part contains a power-down feature that reduces the current consumption of the device to typically 300 nA at 5 V and provides software-selectable output loads
while in power-down mode. The part is put into power-down mode over the serial interface. Total unadjusted error for the part is <0.8 mV.
This part exhibits very low glitch on power-up.
Product Highlights
- Available in a tiny 8-lead SOT-23 package.
- 16-bit accurate, 1 LSB INL.
- Low glitch on power-up.
- High speed serial interface with clock speeds up to 30 MHz.
- Three power-down modes available to the user.
- Reset to known output voltage (zero-scale or mid-scale).
Features and Benefits- Single 16-bit DAC, 1 LSB INL
- Power-on reset to midscale or zero-scale
- Guaranteed monotonic by design
- 3 power-down functions
- Low power serial interface with Schmitt-triggered inputs
- Tiny 8-lead SOT-23 package, low power
- 2.7 V to 5.5 V power supply
- Low glitch on power-up
| Software & Systems Requirements |
Data Sheets
User Guides
Order Information
| Part Number | Package | Packing Qty | Temp Range | Price 100-499 | Price 1000+ | RoHS |
|---|
| AD5062ARJZ-1500RL7 Production | 8 ld SOT-23 | OTH 500 | -40 to 85C | 0 | 5.08 | E |
| AD5062BRJZ-1500RL7 Production | 8 ld SOT-23 | OTH 500 | -40 to 85C | 0 | 5.84 | E |
| AD5062BRJZ-1REEL7 Production | 8 ld SOT-23 | REEL 3000 | -40 to 85C | 0 | 5.84 | E |
| AD5062BRJZ-2500RL7 Production | 8 ld SOT-23 | OTH 500 | -40 to 85C | 0 | 5.84 | E |
| AD5062BRJZ-2REEL7 Production | 8 ld SOT-23 | REEL 3000 | -40 to 85C | 0 | 5.84 | E |
Evaluation Boards
| Part Number | Description | Price | RoHS |
|---|
| EVAL-AD5040SDZ | This board can be used to evaluate the AD5040 DAC. | 99 | Y |
| EVAL-AD5060SDZ | This board can also be used to evaluate the AD5060 and AD5040 DAC. | 99 | Y |
| EVAL-AD5061SDZ | This board can be used to evaluate the AD5061 DAC. | 99 | Y |
| EVAL-AD5062SDZ | This board can be used to evaluate the AD5062 DAC. | 99 | Y |
| EVAL-SDP-CB1Z | Controller Board | 99 | Y |
Reference Materials
