AD537 Integrated Circuit Voltage-to-Frequency Converter

The AD537 is a monolithic V-F converter consisting of an input amplifier, a precision oscillator system, an accurate internal reference generator and a high current output stage. Only a single external RC network is required to set up any full-scale (F.S.) frequency up to 100 kHz and any F.S. input voltage up to ±30 V. Linearity error is as low as ±0.05% for 10 kHz F.S., and operation is guaranteed over an 80 dB dynamic range. The overall temperature coefficient (excluding the effects of external components) is typically ±30 ppm/°C. The AD537 operates from a single supply of 5 V to 36 V and consumes only 1.2 mA quiescent current.

A temperature-proportional output, scaled to 1.00 mV/K, enables the circuit to be used as a reliable temperature-to-frequency converter; in combination with the fixed reference output of 1.00 V, offset scales such as 0°C or 0°F can be generated.

The low drift (1µV/°C typ) input amplifier allows operation directly from small signals (e.g., thermocouples or strain gages) while offering a high (250 M(Ohm) input resistance. Unlike most V-F converters, the AD537 provides a square-wave output, and can drive up to 12 TTL loads, LEDs, very long cables, etc.

The excellent temperature characteristics and long-term stability of the AD537 are guaranteed by the primary bandgap reference generator and the low T.C. silicon chromium thin film resistors used throughout.

The device is available in either a TO-116 ceramic DIP or a TO-100 metal can; both are hermetically sealed packages.

The AD537 is available in three performance/temperature grades; the J and K grades are specified for operation over the 0°C to +70°C range while the AD537S is specified for operation over the extended temperature range, -55°C to +125°C.

Features and Benefits
  • Low Cost A-D Conversion
  • Versatile Input Amplifier
    Positive or Negative Voltage Modes
    Negative Current Mode
    High Input Impedance, Low Drift
  • Single Supply, 5 V to 36 V
  • Linearity: ±0.05% FS
  • Low Power: 1.2 mA Quiescent Current
  • Full-Scale Frequency up to 100 kHz
  • 1.00 V Reference
  • Thermometer Output (1 mV/K)
  • F-V Applications
  • MIL-STD-883 Compliant Versions Available
Analog to Digital Converters
Data Sheets
Documentnote
AD537: Integrated Circuit Voltage-to-Frequency Converter Data Sheet (Rev. C)PDF 179 kB
Application Notes
Documentnote
AN-280: Mixed Signal Circuit TechnologiesPDF 2101 kB
AN-361: Ask the Applications Engineer (V/F Converters)PDF 287 kB
AN-277: Applications for the AD537 Voltage to Frequency ConverterPDF 2290 kB
AN-343: Circuit Ideas for IC ConvertersPDF 391 kB
AN-276: Analog to Digital Conversion by Using V/F ConvertersPDF 646 kB
Frequently Asked Questions
Documentnote
Order Information
Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
AD537JCHIPS ProductionCHIPS OR DIEREEL 14025C16.4616.46Y
AD537JD Production14 ld Side-Brazed CerDIPOTH 250 to 70C50.2545.43N
AD537JH ProductionROUND HEADER/METAL CANOTH 1000 to 70C13.0611.8N
AD537KD Production14 ld Side-Brazed CerDIPOTH 250 to 70C78.971.31N
AD537KH ProductionROUND HEADER/METAL CANOTH 1000 to 70C22.1219.99N
AD537SD Production14 ld Side-Brazed CerDIPOTH 25-55 to 125C115.11104.07N
AD537SD/883B Production14 ld Side-Brazed CerDIPOTH 25-55 to 125C199.48180.32N
AD537SH ProductionROUND HEADER/METAL CANOTH 100-55 to 125C43.4739.29N
AD537SH/883B ProductionROUND HEADER/METAL CANOTH 100-55 to 125C90.9982.25N
AD537: Integrated Circuit Voltage-to-Frequency Converter Data Sheet (Rev. C) ad537
AN-280: Mixed Signal Circuit Technologies ad1674
AN-361: Ask the Applications Engineer (V/F Converters) ad537
AN-277: Applications for the AD537 Voltage to Frequency Converter ad537
AN-343: Circuit Ideas for IC Converters ad537
AN-276: Analog to Digital Conversion by Using V/F Converters ad537