The AD676 is a multipurpose 16-bit parallel output analog-to-digital converter which utilizes a switched-capacitor/charge redistribution architecture to achieve a 100 kSPS conversion rate (10 µs total conversion time). Overall performance is optimized by digitally correcting internal nonlinearities through on-chip autocalibration.
The AD676 circuitry is segmented onto two monolithic chips- a digital control chip fabricated on Analog Devices DSP CMOS process and an analog ADC chip fabricated on our BiMOS II process. Both chips are contained in a single package.
The AD676 is specified for ac (or "dynamic") parameters such as S/(N+D) Ratio, THD and IMD which are important in signal processing applications. In addition, dc parameters are specified which are important in measurement applications.
The AD676 operates from +5 V and ±12 V supplies and typically consumes 360 mW during conversion. The digital supply (VDD ) is separated from the analog supplies (VCC , VEE ) for reduced digital crosstalk. An analog ground sense is provided for the analog input. Separate analog and digital grounds are also provided.
The AD676 is available in a 28-pin plastic DIP or 28-pin side-brazed ceramic package. A serial-output version, the AD677, is available in a 16-pin 300 mil wide ceramic or plastic package.
Features and Benefits
| Analog to Digital Converters |
Document | note |
AD676: 16-Bit Parallel 100 kSPS Sampling ADC Data Sheet (Rev. A) | PDF 388 kB |
AD676: Military Data Sheet |
Part Number | Package | Packing Qty | Temp Range | Price 100-499 | Price 1000+ | RoHS |
---|---|---|---|---|---|---|
5962-9474301MXA Production | S/B OR B/B CERAMIC DIP | OTH 13 | -55 to 125C | 189.55 | 146.44 | N |
AD676AD Production | S/B OR B/B CERAMIC DIP | OTH 13 | -40 to 85C | 66.18 | 51.13 | N |
AD676BD Production | S/B OR B/B CERAMIC DIP | OTH 13 | -40 to 85C | 81.52 | 63.01 | N |
AD676JD Production | S/B OR B/B CERAMIC DIP | OTH 13 | 0 to 70C | 58.5 | 45.4 | N |
AD676JDZ Production | S/B OR B/B CERAMIC DIP | OTH 13 | 0 to 70C | 55.72 | 43.24 | Y |
AD676JN Production | 28 ld PDIP (600mil) | OTH 13 | 0 to 70C | 0 | 0 | N |
AD676JNZ Production | PLASTIC DIP | OTH 13 | 0 to 70C | 42.13 | 38.3 | Y |
AD676KD Production | S/B OR B/B CERAMIC DIP | OTH 13 | 0 to 70C | 67.65 | 52.53 | N |
AD676KDZ Production | S/B OR B/B CERAMIC DIP | OTH 13 | 0 to 70C | 65.23 | 50.65 | Y |
AD676KN Production | 28 ld PDIP (600mil) | OTH 13 | 0 to 70C | 0 | 0 | N |
AD676KNZ Production | PLASTIC DIP | OTH 13 | 0 to 70C | 49.35 | 44.85 | Y |